Entry door, LXi

[david brady]

Brad,

My LXi had a difficult door too. I found it to be the upholstery on
the door itself, specifically at the center of the door and near the
hinge. All those slammings has a tendency to rattle a few screws loose
causing the uphostery panels to move away from the door and jamming
against the door jam when you try to close it. I'd remove the inside
brass handle, back out the screws holding the center panel, pull on the
large lower panel of the door to release the plastic clips, swing
everything out of the way. tighten up all sheet metal screws holding
the interior aluminum panels to the door, and then re-attach the
upholster (securely, maybe with velcro).

David Brady
'02 LXi, Pa