Bendix cruise control
|
01-13-2008, 01:33
Post: #17
|
|||
|
|||
Bendix cruise control
Morning Bill:
There are 2 valves mounted on or near the control unit. I would suspect one of those are sticking from time to time on you for the high idle. Since your cruise is working the cc-5 is working and that is in drive but when in N the air should be metered from those valves to the inversion valve and conversely the cc-5. Back up a step or 2 from the cc-5 and see what you come up with is where I would start. Safe travels, Ralph and Charolette Fullenwider 84FC35 "Ruff Diamond" Duncan, Oklahoma At 12:56 PM 1/13/2008 +0000, you wrote: >HELLO RALPH, > > >Thank you for posting these precious documents. >But, now I am more confused?????? > >Our Bendix cruise control works great. It is the high idle >on our FC that is intermittent, It occationally takes off >and really revs up the 3208, So it can not be trusted or used. > >One of the troubleshooting tips in the manual is to check the >resistance of the potentiometer in the CC-5. >Well two of the readings show an open circuit and the third reading >is in tolerance. >Do you have any advice on where to check further?? > >Thanks again for all your posts. > >Bill 88 FC Michigan > > > >--- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider" > > > > > Hello everyone: > > > > Earlier today, I put some files in a folder in the files section >Concerning > > the Bendix Cruise Control. It is split up into 3 PDF files and is >as > > complete a manual as I have been able to put together over the >years. The > > Manual not only cover advanced trouble shooting, it covers the dip >switch > > set up of the control module and the math that addresses the "why" >of the > > dip switch settings. > > > > Along with these files, I up loaded another PDF file for the 6V and >8V air > > throttle systems, as these systems on the PT's incorporate the air > > throttle. There is another file section that is the text portion >explaining > > how the air throttle works and the sequence of operation that I >wrote a > > couple of years ago. > > > > I hope you find these files helpful. > > > > Oh for those that have not run across it as yet, on the FC's the >high idle > > is set with the cruise control where the PT's the cruise is not >used but a > > separate high idle system comes into play. > > > > > > Safe travels, > > > > Ralph and Charolette Fullenwider > > 84FC35 "Ruff Diamond" (looking good with new oak floors and >captains chairs > > up front) > > Duncan, Oklahoma > > > |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Bendix cruise control - mjzakowski - 09-11-2007, 00:57
Bendix cruise control - Richard Hayden - 09-11-2007, 01:18
Bendix cruise control - Mike Hohnstein - 09-11-2007, 02:21
Bendix cruise control - brad barton - 09-11-2007, 03:21
Bendix cruise control - brad barton - 09-11-2007, 03:21
Bendix cruise control - margaret m zakowski - 09-12-2007, 06:05
Bendix cruise control - Richard Hayden - 09-12-2007, 08:34
Bendix cruise control - margaret m zakowski - 09-12-2007, 12:33
Bendix cruise control - xz3kg7 - 09-13-2007, 10:50
Bendix cruise control - erniecarpet@... - 01-12-2008, 08:04
Bendix cruise control - Ralph L. Fullenwider - 01-12-2008, 12:58
Bendix cruise control - Ralph L. Fullenwider - 01-12-2008, 13:37
Bendix cruise control - Richard Hayden - 01-12-2008, 17:44
Bendix cruise control - Glenn Allen - 01-12-2008, 20:36
Bendix cruise control - pattypape - 01-13-2008, 00:56
Bendix cruise control - Ralph L. Fullenwider - 01-13-2008, 01:26
Bendix cruise control - Ralph L. Fullenwider - 01-13-2008 01:33
Bendix cruise control - Richard Gideon - 01-13-2008, 01:59
Bendix cruise control - Ralph L. Fullenwider - 01-13-2008, 02:07
Bendix cruise control - Richard Gideon - 01-13-2008, 02:43
Bendix cruise control - pattypape - 01-13-2008, 03:08
|
User(s) browsing this thread: 1 Guest(s)