Twin bed measurement help

[Ralph L. Fullenwider]

Thank you Jon, nice install with the water bed frame.

Safe travels,

Ralph and Charolette Fullenwider
84FC35 "Ruff Diamond"
Duncan, Oklahoma

At 08:46 PM 1/23/2008 +0000, you wrote:
>--- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider"
> wrote:
> >
> > Hello everyone:
> >
> > Hope all are staying warm this winter and nice gathering out in Q.
>Well
> > done to all there.
> >
> > Having recently finished with a few projects, I am now looking at
>putting
> > twin beds into the bed room. I need the measurement from the wall
>to the
> > inside edge of the bed platform and was hoping some one with twins
>might
> > supply that info? I know the mattress is 32 X 79. Also if you have
>the
> > metal edging on the out side (aisle) edge would you measure that as
>well
> > please.
> >
> > The island bed in the PT's is nice but in an FC the wife or I are
>crawling
> > over one another to get up in the dead of night and that is not
>making for
> > good sleeping.
> >
> > Thanks for the measurements in advance.
> >
> > Safe travels,
> >
> > Ralph & Charolette Fullenwider
> > '84 FC35 "Ruff Diamond" (with a list of things done and yet to do)
> > Duncan, Oklahoma
>
>Ralph I installed twin bed in my FC and for a mattress I use the type
>they use in the military. Its just the right length and its I think
>about 32 Inches across. As the FC'S have there water tank storage on
>one side I just had to install a mattress on that side and for the
>other side I got from our local Saint Vinnie second hand store the
>bottom part of a upscaled water bed with draws. Works great as they
>have draws in them already and the price I think I paid around 10 or
>15 dollars. You could get two of these units and install them in the
>rear bedroom with no big problem of manufacturing the bed frames. Oh
>yes the length of the unit Installed was just right also. So check
>out some of your local second hand store and you might just find what
>you need. I attached a picture of one I got from Saint Vincent
>Depaul so you can get a real idea of what I did. Jon
>
>http://tinyurl.com/29gj4y
>