Dinette Modifications

[Stephen Birtles]

to accommodate the wheel well

--- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
wrote:
>
> I will be modifying the frame on the rear seat to accommodate the
> wheel wheel and on the front one adding a cabinet for transfer switch
> and new heater more btu's smaller size than the old one
> Also a new table have not decided on material but it will engineered
> plastic of some sort with an electroluminescent underlay
> Stephen 77fc35
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Dorn Hetzel"
> wrote:
> >
> > Will that more recent one fit in the 77?
> >
> > On Jan 28, 2008 5:18 PM, Stephen Birtles wrote:
> >
> > > I just purchased a previously loved dinette from a fellow bird
owner
> > > the dinette is from a 95 BMC and is in good condition it needs a
> > > little help on ht end panels but the rest is Great
> > > It is a flexsteel product with locking slide drawers underneath
> > > as well as being a lot nicer than the orginal it is 6 inches
narrower
> > > at 28 inches from wall to aisle
> > > it also jackknifes to form a bed and does not require the table
top to
> > > form the center section of the bed
> > > I geuss the bottom line is call flexsteel and see what they have
> > >
> > > Stephen 77fc35 with 95 mods
> > >
> > >
> > >
> >
>