Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
84 PT40 - Genset Problems
02-02-2008, 11:12
Post: #10
84 PT40 - Genset Problems
I think Scott gives good advice on the exhaust system checkup. a
plugged system will make the unit run hot, smoke and shake. the
vibration is almost as bad as the noise. Pete may be on to
something when he refers to oil getting sucked up into the intake
because as you state that your kubota leaks oil all over. I wonder
if opening the genset compartment is not cooling the engine but
giving starved air to the intake???? if the closed compartment is
too sealed off it is choking the turbo for air and this will also
make it run hot and smoke????

GregoryO'Connor
94ptRomolandCa


--- In WanderlodgeForum@yahoogroups.com, "jesupbill"
wrote:
>
> I have several problems with my Kuboto generator and before I
start the
> repairs I need some advice. First it does not use oil but smokes
badly,
> to the point that it actually leaves some soot inside the coach.
It has
> several diesel leaks. On a warm day it will overheat unless I
slide it
> out and then it will run cool all day. It is noisy, loud as all
get
> out. I covet those who have whisper quite generators.
>
> I'm thinking about a complete overhaul to replace all gaskets,
etc.
> Injector pump rebuild, new injectors, new fuel lines to replace
any
> leaking, radiator rod out, new muffler. Also the hydraulic
generator
> slide out has quit, but I think repairing that may be over my head.
>
> It has gotten to the point that I dread starting up the ginny and
it
> makes travel alot less enjoyable. All thoughts and advice would be
> welcomed before I do anything.
>
> Bill Garlen
> 84PT40
> Jesup, GA
>
Quote this message in a reply
Post Reply 


Messages In This Thread
84 PT40 - Genset Problems - jesupbill - 02-02-2008, 03:41
84 PT40 - Genset Problems - pattypape - 02-02-2008, 03:56
84 PT40 - Genset Problems - Scott Forman - 02-02-2008, 04:06
84 PT40 - Genset Problems - Mike McMahan - 02-02-2008, 04:09
84 PT40 - Genset Problems - bloomas - 02-02-2008, 04:14
84 PT40 - Genset Problems - jesupbill - 02-02-2008, 06:20
84 PT40 - Genset Problems - Pete Masterson - 02-02-2008, 06:28
84 PT40 - Genset Problems - erniecarpet@... - 02-02-2008, 06:36
84 PT40 - Genset Problems - antique405@... - 02-02-2008, 08:06
84 PT40 - Genset Problems - timvasqz - 02-02-2008 11:12
84 PT40 - Genset Problems - bloomas - 02-02-2008, 11:34
84 PT40 - Genset Problems - Scott Forman - 02-02-2008, 11:48
84 PT40 - Genset Problems - bloomas - 02-02-2008, 12:14
84 PT40 - Genset Problems - erniecarpet@... - 02-03-2008, 02:51
84 PT40 - Genset Problems - Bob Lawrence - 02-03-2008, 06:11
84 PT40 - Genset Problems - bloomas - 02-03-2008, 07:49



User(s) browsing this thread: 3 Guest(s)