Water pump

[pattypape]

Hi Don,

On our 88 fc. The switch is tank fill, up position "ON",
Down position is "OFF". When hooked to city water, the switch can be
toggled On , Off ,On , Off, one can hear and see the hose pressure
turn On & Off. this means the tank is filling or it is not filling.
The Tank fill should always be in the Off position for city water
usage or tank water usage and using the pump for circulation
pressure.
Toggling the switch may help clear a debris build-up in the Sporlan
valve diaphraghm.
How is the frig?????

Bill 88 FC




--- In WanderlodgeForum@yahoogroups.com, "Donald Spithaler"
wrote:
>
> Leroy my switch never had a marking as to fill on or off. I was just
> trying to make sure there wasn't a valve that kept the city water
> pressure off the pump when you were using the city water. I had a
> sensor on my Shur flo pump brake & I couldn't see what caused it
after
> 3 years of using it.
> Don Spithaler
> 89 SP 36'
> Butler, PA
>
> On Feb 10, 2008 3:37 PM, Donald Spithaler wrote:
> > Ernie
> > What you are saying is the sporlan valve only controls the
water
> > going into the tank & when you turn it off you get water from the
pump
> > or city hose. I thought maybe that is why I had trouble with my
pump
> > is because a sporlan valve should isolate the pump from the city
> > water.
> > Don Spithaler
> > 89 SP 36'
> > Butler, PA Zephyrhills, FL
> >
> >
> > On Feb 10, 2008 3:04 PM, wrote:
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Don, I believe the sporlan valve is controlled by the city
water fill
> > > switch.
> > >
> > > Ernie Ekberg
> > > 83PT40
> > > Weatherford, Tx
> > >
> > >
> > > ________________________________
> > > Who's never won? Biggest Grammy Award surprises of all time on
AOL Music.
> > >
> >
>