Water pump

[timvasqz]

Don, put a plug in it!!

The plumbing system in the coach is pressurized in two ways. One by
the introduction of city water pressure to the loop and one by the
pump taking water from the reservoir and pressurizing the loop.

If you pressurize the loop with city pressure there is a backflow
valve built into the sureflow pump that keeps the loop from
backflowing to the tank. by removing the pump and installing a pipe,
you allow the loop to feed back to the tank. The loop will never reach
pressure and the tank will soon overflow.

I think that is yhy you ask??

GregoryO'Connor
94ptRomolandCa



soon it will overflow--- In WanderlodgeForum@yahoogroups.com, "Donald
Spithaler" wrote:
>
> Does any one know an answer to this question. I have a part ordered
> for my Shur-Flo water pump & while waiting for it I took the pump out
> & tied the in & out side of the water lines of the pump together & I
> am on city water right now. After I fill my water tank I put the
> switch in the position that you get water at the facet's if the pump
> is turned on or it is on city water. Question? Does the water pump
> being turned on open & close the sporlan valve or what control's the
> valve?
> Don Spithaler
> 89 SP 36'
> Butler, PA Zephyrhills FL
>