Chassis heat problems

[Gregory OConnor]

If you cant remove the valve maybe try and bypass it to see that
that is the problem first???? KevinMk did that with a remote air
regulator or somthing????
GregoryO'Connor
94ptRomolandCa

--- In WanderlodgeForum@yahoogroups.com, "Don Bradner"
wrote:
>
> My concern is that the front valve may be the plug in the loop, if
it is not opening. Temperature of the engine is not an issue - I ran
it at idle today up to about 160 so that I would have it warm enough
to be sure to feel the heat. All lines stayed cold, including the
top of the pump, until I allowed the pump to run open via the
dismantled Sporlan. Only took a couple of quarts of coolant spilled
to heat up everything through the pump to the valve.
>
> On 3/15/2008 at 4:25 AM Gregory OConnor wrote:
>
> >Could be the pump works when not held against a closed loop????
maybe
> >the return line is simply plugged up. or your fan is staying on,
and
> >the detroit isnt getting hot??
> >
> >The camera trick is one CurtS taught me to do. I have even taken
10
> >meg picks of part labels then was able to read them on the
computer
> >screen.
> >
> >When you look at all the controls and appliances exposed to the
> >weather on these rigs it is a wonder that anything works.
> >
> >GregoryO'Connor
> >94ptRomolandCa
>