oil type

[Don Bradner]

Straight 40. I'm not overly brand-conscious, but it happens that I'm sitting in
the waiting room (the wonders of air cards!) of a DD service operation getting
an oil change as I type this, and they are using Delo 100.

As an aside, CCW tried to change my oil in January but couldn't get the plug
out. It has/had a male square 5/8-inch plug. The guys here were only able to
round it off some more, so they welded a large nut to it, and that allowed them
to get enough torque to do the job. It was cross-threaded, with most of the
damage done to the plug and not the pan. They think that cleaning the threads
with a tap will allow a new plug to work OK.

Don Bradner
90 PT40 "Blue Thunder"
Eureka, CA

On 3/28/2008 at 5:07 PM birdboat45 wrote:

>What oil to use in 8v92 Delo 40 weight 400 or what. Thanks
>Jack Jones
>87 pt 40