8v92 will not crank

[KB9BG]

Scott:

I had the very same happen on my
previous 85 pt40 and found a corroded connection on the ground to the frame had
pitted and was losing connection even though is appeared to be plenty tight on
the connection. Took it off and ground the connection surface areas &
replaced and all worked well thereof.

Regards

Gregg W. Kizer

96 42’ WBSD

From:
WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On
Behalf Of Scott Forman

Sent: Saturday, April 19, 2008 12:58 PM

To: WanderlodgeForum@yahoogroups.com

Subject: [WanderlodgeForum] 8v92 will not crank

My bus will not crank. Batteries are fine, when
I turn the key,

nothing. Battery gauges do not drop like they normally do when key is

turned to 'start'. Just drove the bus 2 days ago with no problems.



I suspect a loose/corroded connection, where should I begin looking?

Where is the starter solenoid?



Scott Forman

86 PT38

Memphis