Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
how big a pad ?
04-21-2008, 04:44
Post: #7
how big a pad ?
I agree with the others. I'm not at all bothered by gravel spaces, if they're reasonably level and have plenty of gravel so there's no dirt to track into the coach. The idea of a 'patio' pad makes sense, if you want to do that. It would use a lot less concrete and can be about 1/2 the thickness you'd need to handle a heavy coach like a recent BB.
I also agree that 30/50 amp service, and perhaps cable TV might be a better area to invest in.
Pete Masterson
'95 Blue Bird Wanderlodge WBDA 42
El Sobrante CA
"aeonix1@mac.com"


On Apr 21, 2008, at 7:26 AM, Wallace Craig wrote:

Dorn,  I personally  dont care if you have a concrete pad or not; good level small gravel works well.  Unless you pour 6" concrete, you will wind up with a crumbled mess.  A good tractor with a blade to level would be a better investment.  Small  pad to sit a picnc table on would be good.  Also, if people put down levelers, that really is a lot of force on any concrete.

Gary Smith <"gl_smith@ix.netcom.com"> wrote:
Dorn,
Rather than putting down a pad costing you $$$ each, running the length from 
entrance road to exit road (pull through), why not just put down a patio 
pad? Are you expecting people to stay long term (weeks/months/seasonal), or 
short term? Assuming the gravel driveways are reasonably level and in good 
repair, I would rather see you spend the $$$ necessary to make sure each 
spot has 30/50 amp service (properly sized and positioned), water, and 
sewer.
Gary
SOB
----- Original Message ----- 
From: "Dorn Hetzel" 
To: "wanderlodgeforum" 
Sent: Monday, April 21, 2008 9:04 AM
Subject: [WanderlodgeForum] how big a pad ?


> My wife and I have a small campground here in Hogansville, ( see
> http://www.campground.flatcreek.us )
>
> The place is fairly old and we're doing some fixing up. All of the sites
> are presently gravel/grass and a little on the small side, since the park
> was built a long time ago when rigs were smaller I guess.
>
> We're working on some new pull-thru sites with poured concrete pads, and I
> was hoping to solicit opinions about how big a pad would be big enough?
> Concrete is ridiculous around here ( sometimes over $100/yard ), so we 
> don't
> want to overbuild them, but we don't want them to be too small either.
>
> Any opinions in this very unscientific poll welcome Smile
>
> Regards,
>
> Dorn Hetzel
> 77FC35
> Hogansville, GA
>
> ----------------------------------------------------
> This message has been processed by Firetrust Benign.
>
>
>
> E-mail message checked by Spyware Doctor (5.5.0.178)
> Database version: 5.09660
> http://www.pctools.com/spyware-doctor/
> 


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/WanderlodgeForum/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:WanderlodgeForum-digest@yahoogroups.com 
mailto:WanderlodgeForum-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/



Wallace Craig
95 WLWB 42
Azle, Texas
Quote this message in a reply
Post Reply 


Messages In This Thread
how big a pad ? - Dorn Hetzel - 04-21-2008, 01:04
how big a pad ? - Gary Smith - 04-21-2008, 01:19
how big a pad ? - Wallace Craig - 04-21-2008, 02:26
how big a pad ? - Leroy Eckert - 04-21-2008, 02:44
how big a pad ? - Dorn Hetzel - 04-21-2008, 04:11
how big a pad ? - Leroy Eckert - 04-21-2008, 04:39
how big a pad ? - Pete Masterson - 04-21-2008 04:44
how big a pad ? - Dorn Hetzel - 04-21-2008, 05:18
how big a pad ? - Pete Masterson - 04-21-2008, 07:43
how big a pad ? - Dorn Hetzel - 04-21-2008, 08:29
how big a pad ? - Gregory OConnor - 04-21-2008, 14:05
how big a pad ? - Glenn Allen - 04-21-2008, 14:12



User(s) browsing this thread: 1 Guest(s)