air chamber

[Leroy Eckert]

Thanks Mike. If they are out great otherwise it really is not any big deal. I would like to find the rubber grommet. If not I can just replace them just as easily.

Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA

mbulriss <mbulriss@...> wrote:

Leroy,

I can verify that the air chamber is an MGM 30/36.
If you need a model and part number, I have them out on the floor at
the shop and can check it for you. Let me know.

Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX

--- In "WanderlodgeForum%40yahoogroups.com", Leroy Eckert ...>
wrote:
>
> This is what I think, cannot prove it yet. Still looking.
> I think the air chamber is an MGM 30/36 and the tube is nothing more
than a vent to allow air in the non-pressurized side to escape when it
is actuated. It probably does not make any difference if it is cracked
because mine are also and everything is OK. I actually have one tube
missing. If you are getting air out of that hose the unit is probably
leaking internally around the rod and the unit needs to be replaced.
According to what I have read they should be replaced in pairs and
with the exact model or equivalent. There are long and short stroke
models. I suspect ours are long stroke but I cannot get my b f a under
the bus with the air down to get the model and pn. Some BB owners have
replaced theirs
with Bendix which are less expensive.
> I need to find the tube and rubber grommet for mine or replace the
units. Mine are not leaking at this time.
> Can you see the model and pn on the unit?
> Leroy
>
> gasparillaglass ...> wrote:
thanks Leroy Keep me posted
>
>
>
>
>
>
> ---------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile.
Try it now.
>

---

Be a better friend, newshound, and know-it-all with Yahoo! Mobile. [url=http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR...o8Wcj9tAcJ ] Try it now.[/url]