1111Aa RV3012M inverter installation photos

[Pete Masterson]

Kurt, 

I gotta say, I was thinking that the current location isn't all that bad. I went down and looked over my inverters -- yes, there's a bit of dirt/dust that has accumulated in the metal box -- but it's not a super serious build up. 

I _think_ the previous owner may have replaced the inverters. At least, he installed a Link 2000 R controller (which is somewhat more sophisticated than the original, as I understand). If he replaced the inverters, they were the exact same model as the original. I'm guessing that was the case as I have 4 "owners manuals" for the two inverters.

Next time I have my work clothes on and a dust mask and goggles, I'm going to use some compressed air to blow out the dirt in the inverter box. I'm guessing that it will be pretty gross...

Pete Masterson

'95 Blue Bird Wanderlodge WBDA 42

El Sobrante CA

"aeonix1@mac.com"

On Jun 12, 2008, at 12:30 PM, bumpersbird wrote:

Thanks Everybody,

The time has come to S--T or get off the Pot!

No responce yet from BB.

I've got no more time to waste on reinventing the wheel.

The new inverters are going back into the same place as the old ones.

As noted most of these inverters have been in this location for 

years. 

Mine have been there since 1995 so it's probably not as bad as some 

belive it to be.

Anyway this frees up some funds for other projects.

Kurt Horvath

95 PT-42

10AC