UltraGuard Rock shield

[bubblerboy64]

After finishing up my project of "toad" connection and "toad" wiring I
have moved on. Latest project, a big ole mud flap on the back of the
bus. I've got it on but I have a question about my instillation. The
mud flap is connected to the bus by a piece of angle iron. Nothing in
the directions discussed attaching this to the bus. I drilled up thru
the lower edge of the bumper and put a couple 1/4 inch bolts thru the
angle iron which certainly did the job. My concern is that this thing
is certainly going to drag from time to time and I am concerned that it
is attached too firmly to the bus. I think it should have more freedom
to swing then the way I have it attached now. So my question is how
have you fellows fastened these things to your coaches? It's about
three inches off the road and I have a couple spots that I know its
going to drag over. I was considering getting something like a hook and
just hooking that thru the holes in the bumper, but then that would
possibly allow it to get off the bus. Idea's appreciated.
John Heckman
central Pa
1973 FC