Generator Fan Motor

[P & D]

When I checked it while it was installed
there was 220 volts getting to the motor.

Has anyone replaced and where did they
find the motor. Mine has a part number of 5KCP39KG3186S and on grainger
there is one that is close, but does not have the same mounting.

Thanks again for all the help

Paul

1987 PT38

Hesperia CA

---

From: WanderlodgeForum@yahoogroups.com
[mailto:WanderlodgeForum@yahoogroups.com] On
Behalf Of Wilhelmus Schreurs

Sent: Monday, June 23, 2008 8:34
PM

To:
WanderlodgeForum@yahoogroups.com

Subject: Re: [WanderlodgeForum]
Re: Generator Fan Motor

Paul:

If your windings on your motor were no good, I would doubt that the capacitor
would keep it running that long.

Since I am not near my coach, I think that the motor is 240 volts. Why
not check it from house supply?

Bill 84 FC 35 SB "$quanderlodge"

Terrace, B.C. Canada

----- Original Message
----

From: P & D <audvid1@gte.net>

To: WanderlodgeForum@yahoogroups.com

Sent: Monday, June 23, 2008 8:22:01 PM

Subject: RE: [WanderlodgeForum] Re: Generator Fan Motor

Update on generator fan

I checked voltage and had voltage on both sides of cap and going to
the motor. I replaced the run capacitor and it did not start. I
gave it a small push start and it started turning and ran for 5-10 minutes then
came to a stop.

I had a 50/50 chance that I would be that lucky. I pulled
squireel cage assembly out and put it on the workbench. From the time
that I had run the generator to the time I got unit to my work bench was an 1.5
hours, and the motor case was still very hot, so it makes me think there is
something wrong with the windings in the motor, so I will be out looking for a
new motor.

Paul

1987 PT38

Hesperia, ca

---

.

---

Now with a new friend-happy design! Try the new Yahoo!
Canada Messenger