"Fan" belt for DD Series 60

[Pete Masterson]

I already have a list with most of the filters, etc. Belts are new. I'm not sure about the "serpentine" belt from the 99 list as the Dayco number I found for the DD number doesn't match the Dayco number I found online with specs that match the belt I have. But the Dayco cross reference # is so different in form and length that it might be an old numbering system or some other difference. 

I'm "stuck" at the moment as several likely sources are closed and I'll have to check further on Monday.

Once I run down the numbers, I'll upload the list I have to the Yahoo web site.

Pete Masterson

'95 Blue Bird Wanderlodge WBDA 42

El Sobrante CA

"aeonix1@mac.com"

On Jun 28, 2008, at 2:23 PM, mbulriss wrote:

Pete,

Does that one cross-reference to the one for the 99 in the files?  If

not, how about you and 10AC Kurt collaborate on building a new filter

and belt cross reference chart for the 95 DD60 and add it to the cross

reference File?

Mike Bulriss

1991 WB40 "Texas Minivan"

San Antonio, TX

--- In "WanderlodgeForum@yahoogroups.com", Pete Masterson

wrote:

More on the belt... I think I've found it.

Dayco part # 5120738

73.8" x 1.65" -- 12 ribs

Described as "alternator belt"

Metric No. 12PK1875

Pete Masterson

'95 Blue Bird Wanderlodge WBDA 42

El Sobrante CA

aeonix1@...

On Jun 28, 2008, at 1:45 PM, Pete Masterson wrote:

Found the file. Might be the Detroit 23521337 "serpentine  

belt" (although it's hardly serpentine -- it passes around two  

primary pulleys and two idler pulleys) -- Valley Power Systems is a  

dealer in my area. I've emailed them with specs.

Pete Masterson

'95 Blue Bird Wanderlodge WBDA 42

El Sobrante CA

aeonix1@...

On Jun 28, 2008, at 1:14 PM, mbulriss wrote:

Pete,

The Files say the following for a DD60 on a 1999 LXi:

Air Conditioner Belt  BB# 1907674   Gates # 9002-2070

Mike Bulriss

1991 WB40 "Texas Minivan"

San Antonio, TX

--- In "WanderlodgeForum@yahoogroups.com", Pete Masterson

wrote:

DD Series 60 engine, 95 PT-42:

I've been servicing my AC ... and I just noticed that the first  

'rib'

on the belt that serves the alternator is partially missing. I

suspect that this means the belt is likely to fail sooner rather  

than

later.

The belt is about 73" long and about 1-5/8" wide. It has 12 ribs  

that

fit grooves on the pulleys.

Does anyone have a part number for this belt?

Pete Masterson

'95 Blue Bird Wanderlodge WBDA 42

El Sobrante CA

aeonix1@

------------------------------------

Yahoo! Groups Links

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

    http://groups.yahoo.com/group/WanderlodgeForum/

<*> Your email settings:

    Individual Email | Traditional

<*> To change settings online go to:

    http://groups.yahoo.com/group/WanderlodgeForum/join

    (Yahoo! ID required)

<*> To change settings via email:

    "WanderlodgeForum-digest@yahoogroups.com" 

    "WanderlodgeForum-fullfeatured@yahoogroups.com"

<*> To unsubscribe from this group, send an email to:

    "WanderlodgeForum-unsubscribe@yahoogroups.com"

<*> Your use of Yahoo! Groups is subject to:

    http://docs.yahoo.com/info/terms/