leak in gray water tank

[Leroy Eckert]

This may be a long shot because I have not looked at it. Are you referring to a pin hole in a weld? If so that should be the surround for the tank itself. I thought I had the same kind of leak two years ago. That leak turned out to be a bad paddle rubber in the dump valve which allowed water to seep out the top when full. The water flowed behind the dump valve and followed the bottom of the pipe into the surround for the water tank making it look like the tank was leaking. Just a thought. Leroy Eckert 1990 WB-40 Smoke N Mirrors Dahlonega, GA Royale Conversion --- On Wed, 8/6/08, coreyg67 wrote: From: coreyg67 Subject: [WanderlodgeForum] leak in gray water tank To: WanderlodgeForum@yahoogroups.com Date: Wednesday, August 6, 2008, 9:50 AM Ok, I guess I'm getting my BBird baptism. As I was working on my shorepower problem, I noticed water leaking out from under the coach in the water bay. After a quick inspection, I found a pin hole sized leak in a seam in my gray water tank. Looks like just a weak spot in the construction that cracked a hair with a full load of water on it. Is this something that can be repaired with an epoxy? I think I can get a syringe in there and inject an epoxy into the hole to fill it. If not, how in the world do I go about replacing the gray water tank??? I know its doable, but I want to hear from someone who has done so before. Corey and Jenni 1996 PT42' Prosper, TX