leak in gray water tank

[coreyg67]

Well, I am thinking it is in the tank itself, but now you have me
wondering. The actual leak is coming from the bend in the tank where
it turns up to make the side. It is a pretty good ways away from the
dump valve, and after I dumped the tank, the leak stopped. So, I'm
not sure. I guess, I'll fill the tank and see what it does and
report back.

Corey and Jenni
1996 PT42'
Prosper, TX

--- In WanderlodgeForum@yahoogroups.com, Leroy Eckert
wrote:
>
> This may be a long shot because I have not looked at it. Are you
referring to a pin hole in a weld? If so that should be the surround
for the tank itself. I thought I had the same kind of leak two years
ago. That leak turned out to be a bad paddle rubber in the dump valve
which allowed water to seep out the top when full. The water flowed
behind the dump valve and followed the bottom of the pipe into the
surround for the water tank making it look like the tank was leaking.
Just a thought.
>
> Leroy Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
> Royale Conversion
>
> --- On Wed, 8/6/08, coreyg67 wrote:
> From: coreyg67
> Subject: [WanderlodgeForum] leak in gray water tank
> To: WanderlodgeForum@yahoogroups.com
> Date: Wednesday, August 6, 2008, 9:50 AM
>
>
>
>
>
>
>
>
>
>
>
> Ok, I guess I'm getting my BBird baptism. As I was
working on my shorepower problem, I
>
> noticed water leaking out from under the coach in the water bay.
After a quick inspection, I
>
> found a pin hole sized leak in a seam in my gray water tank. Looks
like just a weak spot in
>
> the construction that cracked a hair with a full load of water on
it. Is this something that
>
> can be repaired with an epoxy? I think I can get a syringe in
there and inject an epoxy into
>
> the hole to fill it. If not, how in the world do I go about
replacing the gray water tank??? I
>
> know its doable, but I want to hear from someone who has done so
before.
>
>
>
> Corey and Jenni
>
> 1996 PT42'
>
> Prosper, TX
>