Entry Step problem

[Jeff Miller]

Start by disconnecting one of the wires to the tape switch above the
step and see if it will retract.

- Jeff Miller
http://www.wanderlodge.net
http://www.millercoachworks.com


--- In WanderlodgeForum@yahoogroups.com, "detroitldc"
wrote:
> I have a 1991 SP36. The problem is when I got the motorhome out of
> mothballs the other day, the entry step was in the extended position,
> and it wont retract. I have tested both switches (at the front
> drivers seat and also at the step well) and they both test fine.
> There is air pressure on the cylinder, but always pressure on the side
> that extends the step. I believe the two switches are three way, so
> when I change the switch and close the door, the step should retract.
> Any ideas?
>
> Jim Gaasch
> 1991 SP36