Landing light trim - 90 SP36
Are they 1.5" wide painted rectangular close out plates? If so and you cannot find new ones you should be able to attach then with NP-1 caulk. If the plate actually holds the light housing you may need to mount the light housing with counter sink screws then attach the panel and hope never to change the lights again. I mounted every piece of polished stainless on my coach with NP-1 and Weldwood Contact cement.. It's been there 3 years and has not moved.
Just a thought.
Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
Royale Conversion
--- On Mon, 8/25/08, williamcharrison wrote:
From: williamcharrison
Subject: [WanderlodgeForum] Landing light
trim - 90 SP36
To: WanderlodgeForum@yahoogroups.com
Date: Monday, August 25, 2008, 12:14 PM
I purchased some new Hella landing lights and when I tried to
unbolt the brackets that hold the lights in place, 5 of the
alum studs broke off. I saturated the studs with penetrant but
they still broke off. I managed to get the plates with the
broken studs off the coach but I can't press the studs out.
Does anyone offer a replacement part or a repair service?
Chuck Harrison
Akron, Ohio
90 SP36
|
|