electrical problems

[Gregory OConnor]

May be you can install a 10 amp breaker inline ( like the ac power
box???) for each Prosine. I wonder if the problem that caused the
prosine failure is the connection issue you found and the prosine is
the result. You might want to read thru this link, it may have some
answers???? (look at "open neutral")

http://www.myrv.us/electric/

Greg
--- In WanderlodgeForum@yahoogroups.com, "Don Bradner"
wrote:
>
> I've experienced two serious electrical problems on our current
trip. I'm hoping the second problem (solved) was the cause of the
first, but I can't get my head around exactly how it would be, so
I'm hoping someone with more RV electrical experience than I have
will have a clue. I will rest easier if I know what caused the first
problem.
>
> The first problem I talked about here earlier, but will run
through for clarity:
>
> With a lot of draw going on, I had the 50-amp breaker on the park
pole blow, plus the main inside breakers, plus the breaker for the
inverter. Power was lost on the inverter circuit, and did not return
when breakers were turned back on with reduced draw. The inverter, a
ProSine 2.0, is toast - burnt components obvious when opening the
case. I removed the inverter and wired input/output together for
power on the inverted circuit when on park power, and bought a small
charger to keep the batteries up while parked.
>
> Xantrex sent out a new ProSine 2.0 (half-price, well out-of-
warranty) and I will get it tomorrow. I've been worrying about
hooking it up without knowing what caused the failure.
>
> Problem number 2: Yesterday I moved, and on arrival at a park in
Ogallala the 50-amp park breaker blew as soon as turned on. After
turning off the internal main breakers I was able to get the park
breaker to hold after one more failure. The breaker was "spongy" so
I wasn't sure if it was just weak. Turning on the main breakers
inside worked fine.
>
> Moved again today, and the problem repeated except that nothing
would make it work. In trying various things I found that my 30/50
cord worked fine.
>
> So, I took the coach connector apart and found:
>
> Screw for black wire fell out, and was quite black on the end.
White and Red attached, but screw not tight. Green was not attached
at all - screw all the way in, and wire laid across the top.
Contacting case, but who knows how well.
>
> It is amazing I had power at all. I cut the end off and rebuilt
the connector, and had no problem turning on the power.
>
> It would seem to be an odd coincidence if problem one was not
caused by problem two, but since the ProSine 2.0 should in theory
work regardless of what occurs on the input side I'm not sure what
the connection is. Anybody have thoughts on this?
>
> Don Bradner
> 90 PT40 "Blue Thunder"
> Posting today by satellite from Grand Island, Nebraska
> My location: http://www.bbirdmaps.com/user2.cfm?user=1
>