Jake Brake Problem

[Kurt Horvath]

That's true. If the sensor on the pedal does not go to 0 it will not
activate the Jake. Unfortunatly I replaced min last year, so I'm
looking further down the line. It is something for Johnny to check

Kurt Horvath
95 PT-42
10AC

--- In WanderlodgeForum@yahoogroups.com, "Gregory OConnor"
wrote:
>
> could also be that the prompts are working and it is issue with the
> input, like the fuel pedal not returing all the way relaxed??? the
> mechanical end of the electronics.
> GregoryO'Connor
> 94ptRomolandCa
>
> --- In WanderlodgeForum@yahoogroups.com, "Johnny M Slone"
> wrote:
> >
> > I wonder if ATEC and WTEC are the same trans ECU. The schematic I
> have
> > from the Allison website.
> >
> > Leroy I'm not sure that I have the drawing you mention as I
didn't
> get
> > many with the coach.
> >
> > Kurt, would these pin locations be at the trans ECU and DDEC.
> >
> > My big problem is that I can understand a trouble on paper but
> cannot
> > locate where it on the coach. Comes with age I guess.
> > Thanks.
> > Johnny Slone
> > Pikeville, Ky
> > 98 LXI
> >
>