Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Washer/Dryer
10-01-2008, 09:57
Post: #14
Washer/Dryer

Kurt,



I'd have no problem with it. My coach has a chrome vent attached to the

side of the body - should be available from BB. Works great.



David Brady

'02 LXi, NC



Leroy Eckert wrote:



Mine has side wall vent with a plastic louver vent.The
louvers are flat when not working and open when the dryer is on. It
works great.

Leroy Eckert

1990 WB-40 Smoke N Mirrors

Dahlonega, GA

Royale Conversion



--- On Wed, 10/1/08, Kurt Horvath net>
wrote:

From:
Kurt Horvath net>

Subject: [WanderlodgeForum] Re: Washer/Dryer

To: WanderlodgeForum@yahoogroups.com

Date: Wednesday, October 1, 2008, 4:29 PM





What do you guys think of poking a hole through the body
to exhaust

the dryer staight out from the machine? The current vent system is a

wreck and isn't very effective even if it were rebuilt.



Kurt Horvath

95 PT 42

10AC



In WanderlodgeForum@
yahoogroups. com
, Pete Masterson "aeonix1@..."

wrote:

>

> Well, at least I didn't get a Friday afternoon job. Everything was


> properly installed -- floor supported, etc. Must have been a

> Wednesday, mid-morning installation. ...

>

> I agree that the trap was small, so non-use of the washer and hot

> weather could combine to allow some odor problems. My storage

> location (in the SF Bay Area) doesn't present much of a challenge

to

> sewer traps, fortunately. ..

>

> Pete Masterson

> '95 Blue Bird Wanderlodge WBDA 42

> aeonix1@...

> On the road near Scranton, PA

>

>

>

> On Sep 30, 2008, at 5:18 PM, Kurt Horvath wrote:

>

> > Now were having fun! The dryer exhaust tube is pinched in
half,

> > obviously when installed they just pushed the washer in and

chinked

> > the tube. There was enough lint to weave a shirt, the water
hose

is

> > kinked in half and showing signs of cracking, the electric
heater

> > under the W/D is not mounted very well it's just hanging on
from

the

> > grill and the air powered vent is seized up, the air cylinder
is

> > functional and the on/off light is working for the first time


ever.

> > The floor was cut away to allow access for the dryer vent
hose but

> > they did not block it up in any way. So one side of the
closet

floor

> > is just hanging in air. Must have been a Friday Afternoon.
Yes

Pete I

> > did have to take the door off. No signs of any past water
damage

so

> > far. There is a small water trap but I sure in a few weeks of
hot

> > weather when not being used it would evaporate. Still looking
for

the

> > elusive Pipe vent, I think it's behind the pantry.

> >

> > Kurt Horvath

> > 95 PT 42

> > 10AC

> > - In WanderlodgeForum@
yahoogroups. com
, Pete Masterson

> > wrote:

> >>

> >> It also depends on the installation/ floor plan in your
coach..

With

> >> the "diagonal aisle" floor plan (with an aisle passing by
the

> >> bathroom (a side-bath type arrangement) , my Splende is
located on

> > the

> >> centerline of the coach, in a full-height closet (linens
go above

> > the

> >> washer). This also puts the outlet for the dryer vent
located up

> >> high, above the axle area, just in front of the
differential. The

> >> back of the washer is against the bedroom bulkhead. There
is no

> >> access from the back side.

> >>

> >> A search for the vent-exit from the outside proved
fruitless.

(The

> >> dryer was almost totally ineffective, and I made the
assumption

> > that

> >> the vent was blocked.)

> >>

> >> I eventually had to pull the Splende out of its closet.

> >> Unfortunately, the tight installation requires removing
one of

the

> >> hinged doors to the washer/linen closet. Of course, BB
used a

> > piano

> >> hinge with nearly a dozen screws -- at least they only
did every

> >> other screw.

> >>

> >> Only a relatively small amount of lint was found behind
(and

> > under)

> >> the washer. I discovered that years of lint build up at
the

screen

> >> (to keep vermin out) at the dryer vent exit had formed a
thick

> > (1/2

> >> inch) nearly solid seal -- it was not wonder the dryer
didn't

work!

> >>

> >> The hoses looked to be in good condition -- but replacing
them

> > with

> >> steel-braid replacements would probably be a good
precaution (why

> >> didn't I think of that while I had the washer out...).
The water

> >> outlet is, as you said, simply a typical curved 'hook'
from the

> >> washer feeding into a standing pipe connected with the
plumbing.

I

> >> suspect that the tube isn't sealed to allow venting which
might

> >> otherwise cause undesirable back pressure. We have not

experienced

> >> any unpleasant sewer odors from the washer vent line.
Isn't there

> > a

> >> trap to block odors from the holding tank? (I don't
recall seeing

> > one

> >> in my installation, but then I don't recall not seeing
one

either.)

> >>

> >> There was no sign (water spots, stains on unpainted wood,
etc..)

> > that

> >> the outlet had ever overflowed. I do not have any moisture

> > problems

> >> in the washer/linen closet.

> >>

> >> After cleaning the vent tube and outlet thoroughly, I re-

installed

> >> the washer as it had previously been -- and now the
dryer, while

> >> hardly impressive, does dry clothes. Due to the
relatively small

> > size

> >> of the washer and anemic drying performance of the dryer
(but it

> > does

> >> work and is consistent with reports from others) we still
do the

> > bulk

> >> of our laundry at laundromats, etc.

> >>

> >> Pete Masterson

> >> '95 Blue Bird Wanderlodge WBDA 42

> >> aeonix1@

> >> On the road near Scranton, PA

> >>

> >>

> >>

> >> On Sep 30, 2008, at 12:00 AM, Kurt Horvath wrote:

> >>

> >>> Just tiding up the coach, putting back in the rear
wall of the

> > washer

> >>> dryer closet and wondered dang it's still a bit
musty. I just

> > finished

> >>> vacuuming behind the Splende 2000 last week and had
cleaned up

> >>> everything. I looked behind it once more. How did I
miss that.

The

> >>> drain from the washer goes into a pipe stand. There
is no washer

> > or

> >>> collar around it, it's just the washer drain tube
stuck into a 1

> > ½"

> >>> black pipe. Lots of room to vent back into the
closet. I found

one

> >>> source of unpleasant odor. But that just lead to
another

> > question.

> >>> When

> >>> was the last time anyone changed the water hoses for
the washer?

> > Near

> >>> as I can tell in my coach never. That would make them
13 years

> > old.

> >>> Nearly triple the recommended service life. New
stainless

> > braided

> >>> hoses

> >>> and a some sort of collar or vapor lock for the drain
pipe. Now

I

> > need

> >>> to pull the machine out a bit just make sure the vent
tube is

> >>> OK,and to

> >>> install the new hoses. It did have some lint and was
very dusty

in

> >>> there. And the beat goes on, and the beat goes on. On
and on.

> >>> Kurt Horvath

> >>> 95 Pt 42

> >>> 10AC

> >>>

> >>>

> >>

> >

> >

> >

> > ------------ --------- --------- ------

> >

> > Yahoo! Groups Links

> >

> >

> >

>







No virus found in this incoming message.
Checked by AVG. Version: 7.5.526 / Virus Database: 270.7.5/1701 - Release Date: 9/30/2008 7:08 PM
Quote this message in a reply
Post Reply 


Messages In This Thread
Washer/Dryer - Kurt Horvath - 09-29-2008, 16:00
Washer/Dryer - Leroy Eckert - 09-29-2008, 16:08
Washer/Dryer - Leroy Eckert - 09-29-2008, 16:30
Washer/Dryer - Pete Masterson - 09-30-2008, 01:47
Washer/Dryer - Kurt Horvath - 09-30-2008, 09:18
Washer/Dryer - Eric Perplies - 09-30-2008, 15:07
Washer/Dryer - Kurt Horvath - 09-30-2008, 15:38
Washer/Dryer - Pete Masterson - 10-01-2008, 01:24
Washer/Dryer - Kurt Horvath - 10-01-2008, 08:29
Washer/Dryer - Leroy Eckert - 10-01-2008, 08:45
Washer/Dryer - Don Bradner - 10-01-2008, 08:48
Washer/Dryer - Pete Masterson - 10-01-2008, 09:08
Washer/Dryer - Don Bradner - 10-01-2008, 09:28
Washer/Dryer - David Brady - 10-01-2008 09:57
Washer/Dryer - Leroy Eckert - 10-01-2008, 10:28
Washer/Dryer - Kurt Horvath - 10-01-2008, 12:04
Washer/Dryer - Bob Lawrence - 10-04-2008, 02:42
Washer/Dryer - Kurt Horvath - 10-04-2008, 05:37



User(s) browsing this thread: 1 Guest(s)