Transmission Red Light

[Ralph L. Fullenwider]

There should be a by pass code for that problem in the files section. It
included the "how to."

Safe travels,

Ralph and Charolette Fullenwider
84FC35 "Ruff Diamond"
Duncan, Oklahoma

At 08:26 PM 10/9/2008 +0000, you wrote:
>I would try some of the test like Leroy said with someone in the
>drivers seat looking at the light. when it goes off you will have a
>clue to the connection that has issue. That way it wont end up a now
>and again problem. A shop may just check and poke at everything
>untill bychance it works. always good to learn the real cause. I
>would think it easier and less bucks to find a mobile tec to look it
>over than have it towed.
>
>the allison computer is in the bay under the driver ( in the 94)
>there are plugs and test ports under the shift console in the
>cockpit and there is a converter modual between the atec and ddec
>some place that could have issue with voltage + or ground.
>
> grounds are my first review. I often run a cable from the battery -
>to various locations to add a ground and bypass a weak one.
>
>I always wondered if the retarder making the brake light glow could
>cause an issue with the Allison computer?
>
>Good luck, I am sure you will find it without a tow and be better
>learned on the systems while you search
>Greg94ptCa
>
>
>
>
>--- In WanderlodgeForum@yahoogroups.com, Leroy Eckert
> wrote:
> >
> > Cycle the rear start switch and place in the front start position.
>If my front rear start selector is not just right it will give me a
>do not shift light. I do not have a drawing for the tranny but if
>it's not the rear start selector it's probably a ground related to a
>the speed sensor. Seems like I remember a post a long while back
>with the same symptom. Maybe the one who had the problem will talk.
> > Leroy Eckert
> > 1990 WB-40 Smoke N Mirrors
> > Dahlonega, GA
> > Royale Conversion
> >
> > --- On Thu, 10/9/08, joedana0502 wrote:
> > From: joedana0502
> > Subject: [WanderlodgeForum] Transmission Red Light
> > To: WanderlodgeForum@yahoogroups.com
> > Date: Thursday, October 9, 2008, 3:16 PM
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Does anybody know if there is a way to overide the
>transmission do not
> >
> > shift light. The transmission will not shift. I am sure the
>problem is
> >
> > electrical. I am parked in a place that a tow truck can't get to. I
> >
> > just need to be able to back up about 100'.
> >
> > Thanks for any help.
> >
> >
> >
> > Joe Blankenship
> >
> > 1990 WB40
> >
> > La Conner, Wa
> >
>
>