Transmission Red Light

[joedana0502]

--- In WanderlodgeForum@yahoogroups.com, Leroy Eckert
wrote:
>
> Cycle the rear start switch and place in the front start position.
If my front rear start selector is not just right it will give me a do
not shift light. I do not have a drawing for the tranny but if it's
not the rear start selector it's probably a ground related to a the
speed sensor. Seems like I remember a post a long while back with the
same symptom. Maybe the one who had the problem will talk.
> Leroy Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
> Royale Conversion
>
> --- On Thu, 10/9/08, joedana0502 wrote:
> From: joedana0502
> Subject: [WanderlodgeForum] Transmission Red Light
> To: WanderlodgeForum@yahoogroups.com
> Date: Thursday, October 9, 2008, 3:16 PM



Thanks for all to good ideas. I did find out that something is wrong
with the rear starter switch. It will not start at all from the rear.
I will tear into that switch and see what I can find wrong.
Again thank for all the help.

Joe Blankenship
1990 WB40
La Conner, Wa
Royal Conversion
>
>
>
>
>
>
>
>
>
>
>
> Does anybody know if there is a way to overide the
transmission do not
>
> shift light. The transmission will not shift. I am sure the problem is
>
> electrical. I am parked in a place that a tow truck can't get to. I
>
> just need to be able to back up about 100'.
>
> Thanks for any help.
>
>
>
> Joe Blankenship
>
> 1990 WB40
>
> La Conner, Wa
>