Help! No oil pressure!
|
10-13-2008, 05:43
Post: #20
|
|||
|
|||
Help! No oil pressure!
--- In WanderlodgeForum@yahoogroups.com, "Leroy A. Eckert"
Sorry: http://www.downloadingfiles.co.uk/telefl...gauges/Oil Pressure Systms.pdf >Maybe that will work, it is space sensitive. Leroy in GA > --- In WanderlodgeForum@yahoogroups.com, "Gregory OConnor" > > > > You can go here for a gauge system test directive. > http://www.downloadingfiles.co.uk/telefl...stems.pdf. > There should be ohm references on the site. > There is a cross reference in the files for part numbers. > Leroy Eckert > 1990 WB-40 Smoke N Mirrors > Dahlonega, GA > > > > Ryan, you may want to check ohms into the harness at idle from the > > sensor and ohms out of the harness at idle at the dash to see that > > they match. if not that may prove a wire issue and not a hard part. > > > > I remember Leroy wrestling with the sender and gauge not matching > > signal so that is also a point to consider if you just replace one > > or the other part. > > > > I wonder if someting as simple as teflon tape could prove issue in > > reading, would a 'removal and cleaning' of the sender (RalphF > > montra) not be a prudent first step. > > Greg94pta > > > > --- In WanderlodgeForum@yahoogroups.com, "Ryan Wright" > > > > > > > > Thanks for the numbers, Leroy. This sounds more like what I > > remember > > > seeing the last time I took the coach out. I'm betting I have a > > flaky > > > sending unit. I'll install a mechanical gauge in the engine > > > compartment as a backup and to double-check, then replace the > > sending > > > unit. > > > > > > Appreciate everyone's help, as always. > > > > > > -Ryan > > > '86 PT-40 8V92 > > > > > > On Mon, Oct 13, 2008 at 8:16 AM, Leroy Eckert > > wrote: > > > > Mine will cold start in 20 degree weather with a light puff of > > white smoke. > > > > In summer no white smoke at all. In the cold start the gauge > > reads within 5 > > > > seconds. Oil psi on the freeway at 1800 rpm= 65psi. High idle > > around 40 > > > > psi., hot idle 10-15psi. Hot idle defined as oil temp around 220. > > > > I had a faulty oil pressure sender 2 years ago giving goofy > > readings and it > > > > quit on the road. Changed it out and all has been fine since. > > The first new > > > > one was just as bad as the old one. The second new on is still > > on the bus. > > > > Just back from 5 days in the mountains. Cool and nice. > > > > Sat antenna will not lock on to Sat 110. No football this > > weekend. > > > > Texas kicked butt. Love it. Go Gators. > > > > Leroy Eckert > > > > 1990 WB-40 Smoke N Mirrors > > > > Dahlonega, GA > > > > > > |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Help! No oil pressure! - erniecarpet@... - 10-10-2008, 06:34
Help! No oil pressure! - Ryan Wright - 10-10-2008, 08:57
Help! No oil pressure! - Ryan Wright - 10-10-2008, 09:02
Help! No oil pressure! - erniecarpet@... - 10-10-2008, 09:21
Help! No oil pressure! - mbulriss - 10-10-2008, 09:39
Help! No oil pressure! - Pete Masterson - 10-10-2008, 09:52
Help! No oil pressure! - Ryan Wright - 10-10-2008, 10:03
Help! No oil pressure! - Ryan Wright - 10-10-2008, 11:20
Help! No oil pressure! - bbwlwb88 - 10-10-2008, 13:43
Help! No oil pressure! - Gregory OConnor - 10-10-2008, 18:00
Help! No oil pressure! - Pete Masterson - 10-11-2008, 03:10
Help! No oil pressure! - Ryan Wright - 10-12-2008, 12:31
Help! No oil pressure! - erniecarpet@... - 10-12-2008, 21:04
Help! No oil pressure! - Don Bradner - 10-13-2008, 00:32
Help! No oil pressure! - Leroy Eckert - 10-13-2008, 03:16
Help! No oil pressure! - Ryan Wright - 10-13-2008, 04:14
Help! No oil pressure! - Leroy Eckert - 10-13-2008, 04:45
Help! No oil pressure! - Gregory OConnor - 10-13-2008, 05:03
Help! No oil pressure! - Leroy A. Eckert - 10-13-2008, 05:39
Help! No oil pressure! - Leroy A. Eckert - 10-13-2008 05:43
Help! No oil pressure! - P & D - 10-13-2008, 12:45
Help! No oil pressure! - erniecarpet@... - 10-13-2008, 19:58
Help! No oil pressure! - Gregory OConnor - 10-14-2008, 02:45
Help! No oil pressure! - Ryan Wright - 10-16-2008, 09:17
|
User(s) browsing this thread: 2 Guest(s)