Texas Body Shop.

[Stephen Birtles]

Dupree Products has the moulds for the bumpers \
We can be reached at 888 668 4288
Randy does not have the molds

Stephen fc7735
dupreeproducts.com


--- In WanderlodgeForum@yahoogroups.com, "Gregory OConnor"
wrote:
>
> RandyDupree has the molds or bumpers or has the contact for them 352
> 538 3435. The vent finns are just resting in the frame so you may
> want to remove the frame prior to driving. Could it be that you hit
> the 18 wheeler?? your explanation sounds too convincing.
> Greg94ptCa
>
> --- In WanderlodgeForum@yahoogroups.com, Ron Thompson
> wrote:
> >
> > To anyone who has info.
> >
> > Well the unthinkable happened.  On my way from Waller, Tx. just
> outside of Houston, Tx. I stopped on I-10 in Beaumont at the Petro
> Truck stop on the West side of Beaumont.  since there is no parking
> for a 42 footer in the front of the Restaurant area, I parked in one
> of the 18 wheeler spaces in the rear and went inside to have lunch
> with my wife.  When I parked there was an 18 wheeler on the right or
> Curb side of me and none on the left or Road side.  When I came out
> there were 18 wheelers on both sides and it was kind of a tight
> squeeze.  I got in and backed very carefully out and didn't touch a
> thing and was happy that it was going so well.  I was on my way to a
> Cooper reunion in Newton, TX.  I arrived there and hooked everything
> up and got my minivan off the tilt up trailer I was pulling and
> everything looked good. I never noticed anything wrong.  The next
> day one of my kin folk was looking over my RV and he asked "What
> happened there?"  I
> > said where and he pointed to the road side rear end of my RV and
> lo and behold there was a big chunk of the rear fiber glass bumper
> broken off and the road sheet metal had been pushed in slightly and
> the vent screen was pulled out about 3 inches.  White paint was on
> the sheet metal indicating something white had hit and scraped it . 
> The sheet metal damage appeared to have been hit first and then the
> driver of the 18 wheeler realized what had happened and tried to
> back up and caught the fiberglass bumper and broke off  about 14 to
> 18 inches of it.
> >
> > I am asking all of you if you know of a good body shop that is
> experienced in body work on RV's in or near Houston, TX.  Preferably
> one that is experienced on WanderLodges.
> >
> > I thank you all for your help.
> >
> > Ron Thompson -Waller, Tx.
> >
> > 1995 WLWB 42'Blue Bird
> >
> > (cockyfox@)
> >
>