PT Cruise Control Replacement

[Scott Forman]

Please send anything you have

Thanks

--- In WanderlodgeForum@yahoogroups.com, "sfedeli3" <sfedeli3@...>
wrote:
>
> Scott,
>
> Mine was behaving the same way. They are INCREDIBLY easy to
> troubleshoot. Do you have the schematic for the cruise circuit and
> valves? The first problem with mine was the 12V supply- a wire
between
> the relay and module was corroded. The ground was bad too. The
second
> problem was the RV-1 Pressure Regulator. It was clogged with debris
> from the air system. I also disassembled the two air solenoids and
> cleaned them with plastic-safe solvent and lubed the o-rings with
> silicone. It works great now. Simple 12V systems. I can email the
> troubleshooting guide from Bendix if you want it.
>
> It is rarely the module that fails- but Rick Archie found a guy in
> DFW that rebuilds them!. Usually one of the components fails or is
> having a problem. With the relatively cheap price of fuel- it might
be
> worth your time to visit Ralph over in Okie.
>
> Shane Fedeli
> 85PT40
> Hershey, PA
>
> --- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
> <scottforman75@> wrote:
> >
> > It does nothing at all.
> >
> > Scott
> >
> > --- In WanderlodgeForum@yahoogroups.com, "ronmarabito2002"
> > wrote:
> > >
> > > Why don't you tell us what is going on. Does it turn on? Does
it
> > run
> > > at all? Does it not engage? We need more information to help
you.
> > > It might be salvageable.
> > >
> > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > >
> > > --- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
> > > <scottforman75@> wrote:
> > > >
> > > > My cruise does not work, and I cannot figure out why. I also
> > > > understand that some parts for this old system are no longer
> > > > available.
> > > >
> > > > With that in mind, has anyone installed a new cruise system
on an
> > 80's
> > > > PT with 8v92? I really want to have cruise. I am open to
> > suggestions.
> > > >
> > > > Scott Forman
> > > > 86 PT38
> > > > Memphis
> > > >
> > >
> >
>