Low Beam Headlight Switch

[Donald Spithaler]

Ralph
I just thought about it & I said that wrong . It is the parking lights that is giving me the trouble. Not the low & high beams. Sorry about the confusion.
Don Spithaler'
89 SP 36'

Butler, PA

On Sat, Nov 15, 2008 at 8:06 PM, Ralph L. Fullenwider <"rlf47@swbell.net"> wrote:

Don:



The low beams are a green wire marked 0 and the high beams are red wire

marked 0. The head light switch supplies power to the dimmer switch and

from the dimmer switch the high or low beams are selected, not the dash

head light switch. If you have the head light mod then the dimmer switch

selects the coil of the high or low beam turning them on or off and power

to the head lights is straight from the battery through a 30 am cb.



I would start at the dimmer switch.



Safe travels,



Ralph and Charolette Fullenwider

84FC35 "Ruff Diamond"

Duncan, Oklahoma



At 12:42 AM 11/16/2008 +0000, you wrote:

>When I turn my low beam headlights on sometimes they won't come on.

>The high beams will work. I put a new switch in & thought that

>corrected the problem. The only thing that seems to work is to wiggle

>the cannon plug then it will work for a while & then it will not work

>& this is when he bus has not been moved. The plug is P20. I was

>wandering if any one has a drawing to tell what the # of that wire is

>from the low beam head light switch or how would be a good way to find

>the bad wire?

>Don Spithaler

>89 SP 36'

>Butler, PA

>