BLUEBIRD CLOCK

[Leroy Eckert]

Thanks, How big are the letters and what are they made of. Thanks again. Leory Eckert 1990 WB-40 Smoke N Mirrors Dahlonega, GA --- On Tue, 11/18/08, Marv & Jean wrote: From: Marv & Jean Subject: [WanderlodgeForum] Re: Bluebird Clock To: WanderlodgeForum@yahoogroups.com Date: Tuesday, November 18, 2008, 7:47 PM Leroy: 20 1/2 in. from noxe to tip of bottom wing, 5 3/4 in. high and 1 1/2 inches thick. That is from an original clock out of a 1982. The numberals are: Blue Bird Emblem for 12 o'c;clock, W for 11, A for 10 and so forth until you spell out Wanderlodge. It looks to me if that is backwards but that is the way that they did it. Any other questions mine is in the room with me. Marv 2004 M380 Ocean Shores, WA --- In "WanderlodgeForum%40yahoogroups.com", "Leroy A. Eckert" wrote: > > Anyone out there with a BB clock? If you would give me a measurement > from the nose of the bird to the end of the lower tail it would be > appreciated. Also, does the movement protrude out the back of the > wood? If so how far? > I cut a prototype today out of 3/4" thick wood and it is 19" long by > 6" high. It will accept a 2 3/4" to 3" quality quartz movement in the > wing. My prototype is made from white pine and the original will be > blonde. I plan to make 7 prototypes to see what I can do with them. I > will use red oak on others and I plan to prime, base coat and clear > coat some of the pine to see what happens. I don't have anything else > to do. Colors I am considering are rose,lagoon, black, red and blue. I > may air brush one in a bluebird style and see how that goes. I would > clear coat that one. I would like to put a chime movement in one of > them but it may need to be larger because of constraints in the size > if available dials. > > All are being hand made. > Thanks for any info. > > > Leroy Eckert > 1990 WB-40 Smoke N Mirrors > Dahlonega, GA > Royale Conversion >