BLUEBIRD CLOCK

[Marv & Jean]

Leroy:

The letters are 5/16 in. and are black transfer decals. The letter
look to be "Arial" font. Don't hesitate to ask if you need anything
else.

Marv
2004 M380
Ocean Shores, WA

--- In WanderlodgeForum@yahoogroups.com, Leroy Eckert
wrote:
>
> Thanks, How big are the letters and what are they made of. Thanks
again.
> Leory Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
>
> --- On Tue, 11/18/08, Marv & Jean wrote:
> From: Marv & Jean
> Subject: [WanderlodgeForum] Re: Bluebird Clock
> To: WanderlodgeForum@yahoogroups.com
> Date: Tuesday, November 18, 2008, 7:47 PM
>
>
>
>
>
>
>
>
>
>
>
> Leroy:
>
>
>
> 20 1/2 in. from noxe to tip of bottom wing, 5 3/4 in. high and 1
1/2
>
> inches thick. That is from an original clock out of a 1982.
>
>
>
> The numberals are: Blue Bird Emblem for 12 o'c;clock, W for 11, A
>
> for 10 and so forth until you spell out Wanderlodge. It looks to
me
>
> if that is backwards but that is the way that they did it. Any
other
>
> questions mine is in the room with me.
>
>
>
> Marv
>
> 2004 M380
>
> Ocean Shores, WA
>
>
>
> --- In WanderlodgeForum@ yahoogroups. com, "Leroy A. Eckert"
>
> wrote:
>
> >
>
> > Anyone out there with a BB clock? If you would give me a
measurement
>
> > from the nose of the bird to the end of the lower tail it would be
>
> > appreciated. Also, does the movement protrude out the back of the
>
> > wood? If so how far?
>
> > I cut a prototype today out of 3/4" thick wood and it is 19" long
by
>
> > 6" high. It will accept a 2 3/4" to 3" quality quartz movement in
>
> the
>
> > wing. My prototype is made from white pine and the original will
be
>
> > blonde. I plan to make 7 prototypes to see what I can do with
them.
>
> I
>
> > will use red oak on others and I plan to prime, base coat and
clear
>
> > coat some of the pine to see what happens. I don't have anything
>
> else
>
> > to do. Colors I am considering are rose,lagoon, black, red and
>
> blue. I
>
> > may air brush one in a bluebird style and see how that goes. I
would
>
> > clear coat that one. I would like to put a chime movement in one
of
>
> > them but it may need to be larger because of constraints in the
size
>
> > if available dials.
>
> >
>
> > All are being hand made.
>
> > Thanks for any info.
>
> >
>
> >
>
> > Leroy Eckert
>
> > 1990 WB-40 Smoke N Mirrors
>
> > Dahlonega, GA
>
> > Royale Conversion
>
> >
>