Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Horton Fan
12-03-2008, 13:01
Post: #18
Horton Fan
Thanks Guys
It was the Horton Fan sensor. I have a light on my dash that I installed to tell when the fan is cycling on & off. and on a short trip out today the fan was coming on at 195 & off at 188. I really like to know when the fan is running.

Don Spithaler
89 SP 36'
Butler, PA

On Wed, Nov 26, 2008 at 5:58 PM, birdshill123 <"birdshill123@yahoo.com"> wrote:



Don:



Have you considered it could be the wiring? Have you found the sesnor

under the alternator? Chek that the wires are attached properly. Maybe

the wires cooked and have become brittle giving you intemittent

contact. I would check the wiring first. Then do as Bill and I

suggested and remove the sensor and test. I dont know what it is like

on an SP but on the FC it is a fun job. I had to use a deep 1/2 inch

drive socket and a super long Johnson bar to loosen the sensor. I guess

they sieze to the block threads.



Bruce

1988 FC35




Quote this message in a reply
Post Reply 


Messages In This Thread
Horton Fan - Donald Spithaler - 02-16-2008, 04:00
Horton Fan - Scott Forman - 02-16-2008, 04:59
Horton Fan - Gardner Yeaw - 02-16-2008, 15:36
Horton Fan - Gregory OConnor - 02-17-2008, 04:57
Horton Fan - pattypape - 02-17-2008, 05:27
Horton Fan - Donald Spithaler - 02-17-2008, 14:03
Horton Fan - Gregory OConnor - 02-17-2008, 17:45
Horton Fan - Donald Spithaler - 02-18-2008, 15:26
Horton Fan - Don Spithaler - 11-24-2008, 13:48
Horton Fan - jim riordan - 11-24-2008, 14:30
Horton Fan - Donald Spithaler - 11-24-2008, 14:41
Horton Fan - birdshill123 - 11-25-2008, 01:03
Horton Fan - Donald Spithaler - 11-25-2008, 01:16
Horton Fan - pattypape - 11-26-2008, 06:23
Horton Fan - Donald Spithaler - 11-26-2008, 10:20
Horton Fan - birdshill123 - 11-26-2008, 10:58
Horton Fan - Donald Spithaler - 11-26-2008, 12:40
Horton Fan - Donald Spithaler - 12-03-2008 13:01
Horton Fan - Gardner Yeaw - 12-03-2008, 13:55



User(s) browsing this thread: 1 Guest(s)