1985 PT-40 Holding Tank Valve

[curlesw]

It's leaking past the paddle.

Thanks Glenn, I'll inspect as noted and proceed as needed.

v
Wayne.


--- In WanderlodgeForum@yahoogroups.com, "Glenn Allen"
wrote:
>
> Is the valve leaking past the paddle or is it leaking up past the
shaft by the handle?
>
> You can remove the valve insert by removing two screws on top and
pulling the whole
> assembly. Look for debris keeping the paddle from fully closing and
inspect the rubber for
> damage. You might get by with a clean and lube or you can get new
inserts from Steve
> Birtels at Cape Innovation.
>
> Glenn
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "curlesw" wrote:
> >
> > I have a small leak in the valve for the black holding tank. The
valve
> > is a Dupree. Looking for any insight into how to replace the
valve,
> > does not look to hard but not a 10 min job either. Is this a DIY
job?
> >
> > Thanks.
> >
> > Wayne
> > Escondido, CA
> >
>