Aqua hot instrument panel switch

[RTJ49@...]

Hi Hisham,

Many Foretravels are equipped with the Aqua-Hot systems. And many of us use a factory approved/authorized repairman named Roger Burke. Roger also runs the hydronic heat forum on yahoo groups, just like this group.He is quite knowledgeable with the systems. And he does excellent work, at the most reasonable of prices. The maker of the Aqua-Hot uses Roger to do repairs for themat many of the bigger conventions. He is roaming the south east now, in preparation for the FMCA Perry show. He has any parts you could need with him. Since he is down your way now, you may want to contact him. Try "roger.burke@gmail.com" or "AquaHot.Roger@gmail.com"

You can also go to the hydronic heat group, on-line, thru the yahoo groups.

Hope this helps,

Raymond Jordan

Foretravel

Maryland

In a message dated 1/25/2009 6:53:28 A.M. Eastern Standard Time, dukeflyer@... writes:

--- In "WanderlodgeForum%40yahoogroups.com", "Eric Perplies"
...> wrote:
>
> I once had a similar problem. The problem turned out to be the
> ignitor electrode had vibrated loose and sometimes the burner would
> not ignight. When this happens the system shuts down and has to be
> reset.
>
> Happy trails,
>
> Eric Perplies
> 96' 42' WBWL
>Eric
I had a problem last year but I corrected it by taking apart the
controller cleaned the contacts and reassembled, the system worked find
till now. We had a few day of temps in the upper 20's and low 30's in
Centrol Florida. The electric protion of the Aqua Hot will not keep up
with the heat demand, the diesel must add support to the system. I am
going to take the box apart and see if the electrode woked them self
loloose.
Again Thanks all for the input.

Hisham Amaral
97 Wanderlodge 43'
Titusville, FL for the winter.

---

From Wall Street to Main Street and everywhere in between, stay up-to-date with the latest news.