FowJet Waste pump Kit

[Leroy Eckert]

A little off subject. You have two polished aluminum units. How do you like the Airstream. I love the looks of them. Leroy Eckert 1990 WB-40 Smoke N Mirrors Dahlonega, GA Royale Conversion --- On Mon, 2/2/09, Steve Pfiffner wrote: From: Steve Pfiffner Subject: Re: [WanderlodgeForum] FowJet Waste pump Kit To: WanderlodgeForum@yahoogroups.com Date: Monday, February 2, 2009, 4:06 PM I have used these macerator pumps for several years now and I would recommend an installation that makes it quick and easy to disassemble and get to the impeller. The weakness of these pumps (beyond the cheap 12v motor) is that they do not process hair, it tangles at the impeller and eventually fills the pump, which overloads the motor and kills it. My setup is assembled and disassembled with each use not built in so it makes it easy with needle nose pliers to pull the hair out with each use after everything is rinsed off. I was only getting about two years of fulltimer use from this rather expensive pump until I figured out the hair problem. I could not recommend this pump for a permanent closed installation. Steve Wannabee '89 Airstream Excella '61 Avion Tourist On Mon, Feb 2, 2009 at 2:49 PM, timvasqz <"Petrover1@aol.com"> wrote: I need devise a plan B. I was thinking of pickingup one of these FlowJetDump Kits now on sale at CampWorld. Has any one had an experience with them? In my raural area of SoCal we are on septic. the problem with a quick dump into the septic tank is the solids wash over to the clean side of the tank then filter into the leachlines. I want to pump the holding tank 2.5 foot deep into the solid side of the septic to displace clean water ontop over to the clean side of the tank. Gregory Of Tim&Greg