Lighting problem
|
02-05-2009, 17:10
Post: #4
|
|||
|
|||
Lighting problem
Jerry,
Seems strange that all would stop working at one time. Follow the other responses first. Assuming the '85 PT40 is the same as an '87 PT38... Is there 12V at the switch(s)? If there is 12V...remove one of the florescent fixture frame/box. There should be an inverter attached to the fixture box...the lights work on AC and have an inverter to run each light. Test for 12V feeding the inverter. If there is 12V...and assuming the bulbs are good...replace the inverter as it's no longer working. Stephen Birtles sells the inverters. You will need one for each florescent fixture. I changed several in our coach. Good luck. Curt Sprenger 1987 PT38 8V92 "MacAttack Racing" Anaheim Hills, CA On Thu, Feb 5, 2009 at 8:09 PM, jburgessx2 <"jburgessx2@yahoo.com"> wrote:
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Lighting problem - jburgessx2 - 02-05-2009, 13:01
Lighting problem - Don Bradner - 02-05-2009, 14:42
Lighting problem - jburgessx2 - 02-05-2009, 16:09
Lighting problem - Curt Sprenger - 02-05-2009 17:10
Lighting problem - Ernie Ekberg - 02-06-2009, 00:42
Lighting problem - Pete Masterson - 02-06-2009, 06:31
Lighting problem - Don Bradner - 02-06-2009, 09:33
Lighting problem - Bob Lawrence - 02-06-2009, 11:29
Lighting problem - GARY MINKER - 02-07-2009, 03:19
Lighting problem - GARY MINKER - 02-07-2009, 03:23
Lighting problem - GARY MINKER - 02-07-2009, 03:24
Lighting problem - jburgessx2 - 02-07-2009, 05:50
|
User(s) browsing this thread: 1 Guest(s)