Generator radiator hose

[jburgessx2]

Scott,

Thanks. I'll take off the hoses before going to the parts store to
make sure I get the right size.

Jerry
85 PT40
Port Hueneme, CA

--- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
<scottforman75@...> wrote:
>
> I replaced mine last year, took the old hose to NAPA and they sold
me
> an appropriate length of hose they cut out of a bulk box. You are
> right that it is just regular 2" hose.
>
> One tip...be as accuate as possible on length, the problem with
being
> too short is obvious, but being too long also creates trouble as
the
> hose can get bound up behind the gen slide if there is too much
> slack.
>
> Scott Forman
> 86 PT38
> Memphis
>
> --- In WanderlodgeForum@yahoogroups.com, "jburgessx2"
> wrote:
> >
> > My 12.5 generator is in need of some new radiator hoses. I
> searched on
> > the internet trying to find these hoses in the longer length. As
> you
> > know, these hoses just appear to be straight wire reinforced 2"
> hose.
> > But, they need to be quite long and I was unable to find them
> online (I
> > could have been looking in the wrong place).
> >
> > Or, is this something I can just walk into NAPA (or any other
parts
> > store) and have them order? I'm just not sure if this is
supposed
> to
> > be something special for the BB or if it's generic hose and I
don't
> > want to buy the wrong thing.
> >
> > Thanks.
> >
> > Jerry
> > 85 PT40
> > Port Hueneme, CA
> >
>