Refurbishing the Interior on Old Bird

[Jon]

--- In WanderlodgeForum@yahoogroups.com, "Jon" wrote:
>
> --- In WanderlodgeForum@yahoogroups.com, "timvasqz" > wrote:
> >
> > may be it is wallpaper adhesive and commercial wall paper remover
> may
> > work???? when I paint or paper over a stain or gloss, some times
it
> > is necessary to use a good sealer/primer or roll on a thin mix
of
> > elmers glue. it could be that they primed it??????
> > Greg of Tim&Greg
> > 94ptCa
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Jack & Donna Smith"
> > wrote:
> > >
> > > It seems the former owner of our 1973 Bird papered the wall
area
> > behind
> > > the dinette, and the wall next to the sink. We have the paper
> off,
> > but
> > > there is some type of thin white paint on the wall. What can
we
> > use to
> > > remove this that will not affect the "Natural Wood" factory
> > finish?
> > > Paint Thinner, Alchol, Acatone, or Laquer thinner come too
mind...
> > > What to use that will not dissolve the factory finish??
> > > Sanding will work, but it is very slow, and there is the danger
> > that it
> > > will gouge the finish.
> > > Has anyone covered these areas with anything that looks good,
and
> > if
> > > so, what?
> > > Jack Smith
> > > 1973FC31
> > > SoCal
> > >
>
>
> Dick do you have a spot where you could test a product to see
if
> would help remove that white paint? A friend of mine used some
> ovencleaner but sparingly and with lots of fresh air in the general
> area. Like I said you could just test an area that would not show
> and this might be the trick. Be sure to wear gloves and have a fan
> on. Jon
> >

Oh yes maybe a set of clear plastic safety gogles? \\
Jon
Rebel Bird
>