Refurbishing the Interior on Old Bird

[George Burke]

Jack, MaybeGoo Gonewill work. I use the spray bottle to remove the sticky glue left after I remove a label from a plastic/glass bottle that I want to store something else in. I think the thick gel works better, but you get more coverage from the spray gel, as it is thinner. Good Luck, George Burke 1977 FC31 Charlotte

On Sun, Feb 22, 2009 at 8:29 AM, Ernie Ekberg <"ernietex@yahoo.com"> wrote:

Jack, I suspect that the PO used Kilz to neutralize the surface. You might try a paint remover in a small area first. In one of our rentals we had hardwood floors under the carpet. The previous remodeler decided to not cover those floors when painting. I bouight a gallon of stripper and applied it like the directions. But I did not let it set too long. As soon as the paint was starting to bubble, I scraped it off. Tedious, for sure. Ernie Ekberg 83PT40 Wanderlodge Weatherford, Tx http://autos.groups.yahoo.com/group/erni...gandrepair --- On Sat, 2/21/09, Jack & Donna Smith <"jaxdon@cox.net"> wrote: From: Jack & Donna Smith <"jaxdon@cox.net"> Subject: [WanderlodgeForum] Refurbishing the Interior on Old Bird To: "WanderlodgeForum@yahoogroups.com" Date: Saturday, February 21, 2009, 10:36 PM It seems the former owner of our 1973 Bird papered the wall area behind the dinette, and the wall next to the sink. We have the paper off, but there is some type of thin white paint on the wall. What can we use to remove this that will not affect the "Natural Wood" factory finish? Paint Thinner, Alchol, Acatone, or Laquer thinner come too mind... What to use that will not dissolve the factory finish?? Sanding will work, but it is very slow, and there is the danger that it will gouge the finish. Has anyone covered these areas with anything that looks good, and if so, what? Jack Smith 1973FC31 SoCal