Air Brake Accuators

[birdshill123]

I had all of our brake pots and hoses replaced. On Our 87 the standard pot
would not work. The actuating rods are too long. Had to disassemble the whole
unit and install the old threaded rod. Not sure if that is required on yours.
You can just buy the diaphragm and use the old pot but I figured why fool around
with something over 20 years old. Your #'s sound correct. BTW: This is one dirty
job that I would never undertake myself. The fronts were not too hard but the
rears are murder. You really need a pit.


Bruce
1988Fc35