Generator gagues not working

[Whitewolf_993]

Its Fixed, the harness was binding someone tried to fix somewhere in the past
but mad a poor joint, so I soldered and heat shrink and redressed the harness
and replaced the makeshift battery tie down and they are working. thanks for
the help.

--- On Mon, 3/16/09, Ralph L. Fullenwider wrote:

> From: Ralph L. Fullenwider
> Subject: Re: [WanderlodgeForum] Re: Generator gagues not working
> To: WanderlodgeForum@yahoogroups.com
> Date: Monday, March 16, 2009, 6:19 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hi John: The oil pressure sender is located
> on the side nearest the entry
>
> door. It is a large silver looking can with a domeish top
> and a wire
>
> attached to it. The Temp sender is on top of the Perkins to
> the front of
>
> the block and looks like a modified spark plug.
>
>
>
> The signal should go through the control box then harness.
>
>
>
> Safe travels,
>
>
>
> Ralph & Charolette Fullenwider
>
> '84 FC35 "Ruff Diamond"
>
> Duncan, Oklahoma
>
>
>
> At 03:08 PM 3/16/2009 -0700, you wrote:
>
> >There are senders on the sides of the perkins. When
> Ralph gets online
>
> >perhaps he will give the exact location. I'm not at
> my coach at the moment.
>
> >
>
> >Ernie Ekberg
>
> >83PT40
>
> >Wanderlodge
>
> >Weatherford, Tx
>
> ><http://autos.
> groups.yahoo. com/group/ erniesremodeling
> andrepair>http://autos.
> groups.yahoo. com/group/ erniesremodeling andrepair
>
> >
>
> >
>
> >--- On Mon, 3/16/09, Whitewolf_993 > yahoo.com> wrote:
>
> >From: Whitewolf_993 > yahoo.com>
>
> >Subject: Re: [WanderlodgeForum] Re: Generator gagues
> not working
>
> >To: WanderlodgeForum@
> yahoogroups. com
>
> >Date: Monday, March 16, 2009, 8:37 AM
>
> >
>
> >
>
> >
>
> >I did run the generator out and did not see anything
> where is the sender
>
> >located?
>
> >--- On Mon, 3/16/09, Ernie Ekberg > com> wrote:
>
> >>From: Ernie Ekberg
>
> >>Subject: Re: [WanderlodgeForum] Re: Generator
> gagues not working
>
> >>To: WanderlodgeForum@ yahoogroups. com
>
> >>Date: Monday, March 16, 2009, 7:14 AM
>
> >>
>
> >>John, run your generator out and see if the wiring
> harness has fallen off
>
> >>its senders.
>
> >>
>
> >>Ernie Ekberg
>
> >>83PT40
>
> >>Wanderlodge
>
> >>Weatherford, Tx
>
> >><http://autos.
> groups.yahoo. com/group/ erniesremodeling
> andrepair>http://autos.
>
> >>groups.yahoo. com/group/ erniesremodeling
> andrepair
>
> >>
>
> >>
>
> >>
>
> >>--- On Sun, 3/15/09, Marv & Jean
> wrote:
>
> >>>From: Marv & Jean > nwlink.com>
>
> >>>Subject: [WanderlodgeForum] Re: Generator
> gagues not working
>
> >>>To: WanderlodgeForum@ yahoogroups. com
>
> >>>Date: Sunday, March 15, 2009, 9:14 PM
>
> >>>
>
> >>>John:
>
> >>>
>
> >>>There were no switches to control the gauges
> for the generator on my
>
> >>>82FC35. The other sad part is I have no idea
> what could be wrong.
>
> >>>
>
> >>>Marv
>
> >>>2004 m380
>
> >>>Ocean Shores, WA
>
> >>>
>
> >>>--- In
>
> >>><http://us.mc431.
> mail.yahoo. com/mc/compose? to=WanderlodgeFo
> rum%40yahoogroup s..com>WanderlodgeForum@
>
> >>>yahoogroups. com, Whitewolf_993
> wrote:
>
> >>> >
>
> >>> >
>
> >>> >
>
> >>> > We bought a 1982 FC-33 and when we looked
> at the unit the Generator
>
> >>> gauges in the dash worked, we bought the couch
> (a week ago and got it
>
> >>> home) started the generator and the gagues are
> not working what have i
>
> >>> gotten turned off?
>
> >>> >
>
> >>> > John
>
> >>> >
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>