changing belts and hoses

[Stephen Birtles]

if it was an addon otherwise it does not have swingout rad you can change the
belts without opening the front be sure you have all the belts before you start
and tightening them you do some from the top inside and some fromm the bottom
out side Another added feature make sure you have a case of beer for the finish

stephen 77fc35
dupreeproducts.com





--- In WanderlodgeForum@yahoogroups.com, Dorn Hetzel wrote:
>
> I don't know if it has a swing out radiator or not. In the 18 months or so
> that I have owned it, I have not yet had to access the radiator other than
> to check coolant. Were swing out radiators an option in 77 FC 35 ?
>
> On Tue, Mar 31, 2009 at 6:00 PM, Curt Sprenger wrote:
>
> > Does your coach have the swing out radiator? Makes the job a lot easier.
> > Might be a good time to fabricate your own swing radiator. Several
> > procedures and pictures can be found on the forum.
> >
> > Curt Sprenger
> > 1987 PT38 8V92 "MacAttack Racing"
> > Anaheim Hills, CA
> > *Read all about Southwest Bluebirds and Friends (SWBB) at
> > http://www.SOUTHWEST-BLUEBIRDS.ORG ...Then Join us.
> > "Host of the Annual Bluebird Quartzsite Rally" *
> >
> >
> >
> >
> > On Tue, Mar 31, 2009 at 2:25 PM, Dorn Hetzel wrote:
> >
> >> It looks like I will need to be replacing some belts on my 77FC35
> >> fairly soon.
> >>
> >> All are still working, but getting a bit loose.
> >>
> >> Do I understand correctly that getting to the belts on the 77FC35 involves
> >> removing the bumper, front panel and radiator ?
> >>
> >> If it's going to be a big job like that, I presume I will want to replace
> >> all belts and any hoses in that area while I have the radiator off.
> >>
> >> Can anyone who has done this task offer me some clues? If I were to pay
> >> someone to do it, can anyone estimate what I should expect it to cost?
> >>
> >> Regards,
> >>
> >> Dorn Hetzel
> >> 77FC35
> >> Hogansville, GA
> >>
> >
> >
> >
>