Park Brake Air Valve

[Don Bradner]

Ralph, have you ever known it to become plugged/obstructed?

On 4/22/2009 at 7:10 AM Ralph L. Fullenwider wrote:

>Leroy/ Don:
>
>If you slide under the drivers side front bumper area and look up there
>should be a small hose that is open ended and that will be the exhaust
>from
>the PP-1 valve.
>
>Safe travels,
>
>Ralph and Charolette Fullenwider
>84FC35 "Ruff Diamond"
>Duncan, Oklahoma
>
>At 03:58 AM 4/22/2009 -0700, you wrote:
>
>
>>Don, I do not know where the exhaust exits. I have not chased mine down.
>>Leroy Eckert
>>1990 WB-40 Smoke N Mirrors
>>Dahlonega, GA
>>Royale Conversion
>>
>>--- On Tue, 4/21/09, Don Bradner wrote:
>>>
>>>From: Don Bradner
>>>Subject: Re: [WanderlodgeForum] Park Brake Air Valve
>>>To: WanderlodgeForum@yahoogroups.com
>>>Date: Tuesday, April 21, 2009, 5:30 PM
>>>
>>>Mine has been problematical for some time, so I just ordered a reman
>PP-1
>>>from http://www.anythingtruck. com - $31.50+11.48 shipping.
>>>
>>>Leroy, there is a line on the exhaust port. I have not tried to trace
>>>where it goes, do you know? I assume it is to keep noise down, but
>>>blockage in that line would certainly make operation problematical.
>>>
>>>Don Bradner
>>>90 PT40 "Blue Thunder"
>>>My location: http://www.bbirdmaps. com/user2. cfm?user= 1
>>>
>>>On 4/21/2009 at 12:24 PM Leroy Eckert wrote:
>>>
>>> >Bill, on my coach the push /pull control valve assembly is a Bendix
>PP-1,
>>> >30PSI.
>>> >Try http://www.anythingtruck. com. Remans available. My book shows BB number
>for
>>> >what it's worth is 0900266. I can send you a photo of the drawing if
>you
>>> >like..
>>> >Leroy Eckert
>>> >1990 WB-40 Smoke N Mirrors
>>> >Dahlonega, GA
>>> >Royale Conversion
>>
>>