CW CAN'T GET DEAD FRIG OUT OF BIRD!!!

[timvasqz]

I found loading the big stuff in to a tall standing tuck helps get it into the bus.

1. use a 1 inch thick x 2f wide x 8ft long strip of plywood
2. remove the passenger seat
3. close the step well
4. remove the door open limit strap
5. load the new refer in a tall standing pick up truck, lower bus
6. back the pickup with tailgate down close to the open door at right angel to bus
7. place the plywood on the top floor of the bus extending to the pickup bed
8. may require post bracing under the bus stepwell if the truck is not tall enough

Greg of Tim&Greg
94ptca


--- In WanderlodgeForum@yahoogroups.com, "Jack and Liz Pearce" wrote:
>
>
> --- In WanderlodgeForum@yahoogroups.com, "smquandt" smquandt@
> wrote:
> >
> > Jack & Liz
> >
> >
> >
> > I've removed mine, also in a 93 without going through the windshield.
> Call
> > me 906-774-8882.
> >
> >
> >
> > Steve Quandt
> >
> > 1993 PT-40
> >
> > Iron Mountain, MI
> Howdy, Steve.
> The problem with removing the frig is getting it past the DINETTE Bench
> so we can get it up to the FRONT of the coach. Jack is working on
> another solution, though. He is talking to Texas Custom Coach.
>
> Thanks,
> Liz
> Regards,
> Jack and Liz Pearce
> Fulltiming in a 1993 Wanderlodge WB40
> D'Hanis, TX
> Buena Vista, CO
>