Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Transmission Temporarily Would Not Go In Gear
05-08-2009, 13:53
Post: #7
Transmission Temporarily Would Not Go In Gear
Thanks Pete. I am fairly confident I had my head buried and rushed the start. I usually wait for the buzzers to quiet down before starting. I wanted to get things accomplished today. Haste makes waste. I won't do that again.
Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
Royale Conversion

--- On Fri, 5/8/09, Pete Masterson wrote:
From: Pete Masterson
Subject: Re: [WanderlodgeForum] Transmission Temporarily Would Not Go In Gear
To: WanderlodgeForum@yahoogroups.com
Date: Friday, May 8, 2009, 9:31 PM



I've learned it's never a good thing to rush the starting sequence. I've never had your particular problem, but I have had some warning lights stick on, etc. Shutting down, count to ten, turn the key on, wait a full 30 -40 seconds, (when one of the buzzers usually stops), then starting seems to avoid spurious errors...

Pete Masterson
'95 Blue Bird Wanderlodge WBDA
42
El Sobrante CA


On May 8, 2009, at 2:37 PM, Leroy Eckert wrote:


Ralph,
You know, I may have not let the sequence of events occur when I placed the key in run. The second time I tried it I watched the do not shift light sequence do its thing. I did not the first time. The next time I move it I will see if I can force it to happen. But I don't know if that is a good idea. The jack level warning was ok.
Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
Royale Conversion

--- OnFri, 5/8/09, Ralph L. Fullenwider<rlf47@swbell. net>wrote:
From: Ralph L. Fullenwider <rlf47@swbell. net>
Subject: Re: [WanderlodgeForum] Transmission Temporarily Would Not Go In Gear
To:WanderlodgeForum@ yahoogroups. com
Date: Friday, May 8, 2009, 4:01 PM


Leroy:

Did you turn the key to the run position and let the trans checksum
complete and light
go out before starting? Also the HWH jacks computer
board may have hung on you and not reported the green travel light. So when
you switched the engine off, it allowed every thing to re set. Pure guess
work, of course, but possible.

Safe travels,

Ralph and Charolette Fullenwider
84FC35 "Ruff Diamond"
Duncan, Oklahoma

At 07:44 PM 5/8/2009 +0000, you wrote:
>Today I took the coach to get some fuel. Every thing was normal. When I
>went to leave the station I started the bus and everything was normal.
>When I selected D on the shift pad nothing happened. It would not shift to
>any gear out of neutral. I shut
it off and let it sit for 5 minutes
>deciding what to do. Restarted and all is well. I wonder if it will happen
>again. Scratching my head on this deal.
>HT-755 Allison 5 speed electric retarder. I do not have any drawings for
>the tranny system or the key pad. Anyone know how it works when it works
>properly. Relays, computer board?????
>
>Leroy Eckert
>1990 WB-40 Smoke N Mirrors
>Dahlonega, GA
>Royale Conversion
>
>
>



Quote this message in a reply
Post Reply 


Messages In This Thread
Transmission Temporarily Would Not Go In Gear - Leroy A. Eckert - 05-08-2009, 07:44
Transmission Temporarily Would Not Go In Gear - Ralph L. Fullenwider - 05-08-2009, 08:01
Transmission Temporarily Would Not Go In Gear - Leroy Eckert - 05-08-2009, 09:32
Transmission Temporarily Would Not Go In Gear - Leroy Eckert - 05-08-2009, 09:37
Transmission Temporarily Would Not Go In Gear - Pete Masterson - 05-08-2009, 13:31
Transmission Temporarily Would Not Go In Gear - Leroy Eckert - 05-08-2009 13:53
Transmission Temporarily Would Not Go In Gear - Curt Sprenger - 05-08-2009, 15:09
Transmission Temporarily Would Not Go In Gear - timvasqz - 05-09-2009, 04:04



User(s) browsing this thread: 5 Guest(s)