Valve stem extenders??
|
06-08-2005, 11:24
Post: #9
|
|||
|
|||
Valve stem extenders??
The longer the extention the more centrifical force and wiggle,
which could possibly lead to valve stem or seal fatigue. For now no extenders, Just a screw on cap with the ability to check the air pressure. I use a straight shank air chuck and a straight air pressure gage. But you do need to bend over and peak into that hole in the rim for the inner dual. With extenders, the stem could possibly be about eight or more inches long. I have no experience with the black plug that looks like a hocky puck. Bill 88FC,My old hocky knees and back would like to try the blackplug --- In WanderlodgeForum@yahoogroups.com, "Rick B" > Steve, > > I use an extender and the rubber insert for stabilizing it in the > wheel. I also added the Double Seal caps to make checking pressures > faster and easier. I have had no problems so far. > > - Rick > 87FC35 > Rochester, MN > > --- In WanderlodgeForum@yahoogroups.com, bobloomas > > > > ----- Original Message ----- > > From: "Curt Sprenger" > > To: > > Sent: Tuesday, June 07, 2005 9:10 PM > > Subject: Re: [WanderlodgeForum] Valve stem extenders?? > > > > That is the same kind I use made by Good Year > > Bob Loomas 85 PT 36 > > > > > > > Steve, > > > I've used the extender and rubber inserts for several years...always > > > there and no problems at all. > > > > > > Curt Sprenger `87PT38, Anaheim, Calif. > > > > > > > > > > > > > > > SFMEACH wrote: > > > > > >> The valve stem on my inside dualie is not accessible by most tire > > >> inflators at gas stations or truck stops. I have done some research > > >> and have found several options to extend the valve stem so it can be > > >> reached by a regular inflator. What is the risk of leaving the > > >> extender on permanently vs. just using the extender to inflate the > > >> tire? Also if I leave the extender on, does anyone have experience > > >> with the rubber inserts that hold extenders in the round hole in the > > >> wheel? > > >> > > >> Steve Meach > > >> 84FC35 > > >> Paw Paw, MI > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Valve stem extenders?? - SFMEACH - 06-07-2005, 13:56
Valve stem extenders?? - Curt Sprenger - 06-07-2005, 14:10
Valve stem extenders?? - bobloomas - 06-07-2005, 14:18
Valve stem extenders?? - Dave Beatty - 06-07-2005, 15:54
Valve stem extenders?? - sfedeli3 - 06-07-2005, 22:57
Valve stem extenders?? - pattypape - 06-08-2005, 02:37
Valve stem extenders?? - Rick B - 06-08-2005, 04:14
Valve stem extenders?? - Jeff Miller - 06-08-2005, 04:50
Valve stem extenders?? - pattypape - 06-08-2005 11:24
|
User(s) browsing this thread: 1 Guest(s)