air step diagnosis

[dan]

Thanks Leroy, I am still enjoying the clock you made for me, thanks. I have a wiring diagram for the step in my blue box but the wire colors don't match with the relays. Do you know if the relays should be hot? And does the step and the light share the same switch? This step is a PITA.

Regards,

Dan Williams,88wb38,Jackson,MS

----- Original Message -----

From: "jwasnewski@yahoo.com"

To: "WanderlodgeForum@yahoogroups.com"

Sent: Sunday, June 28, 2009 8:13 AM

Subject: [WanderlodgeForum] Re: air step diagnosis

--- In "WanderlodgeForum@yahoogroups.com", "pattypape" ..> wrote:

Look in the database. I think there is a wiring diagram there. I think at least one of the other switches operates the alarm system.
Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
In Green Bay
>
>
> Check the door switches.
>
> Bill 88 FC Michigan
>
> --- In "WanderlodgeForum%40yahoogroups.com", "maureyroad" wrote:
> >
> > My air step is not working. If I apply power directly to the solinoids the step goes in and out properly. The dash switch light stays on all the time. There are three door switches in the door jamb. The lower one operates the step light and I don't know what the top two operate. The relays seem very hot to touch and they all have power. The pressure switch has power. The wire that supplies power to the extend solinoid has power all the time if the door is open or closed. The pressure strip has been removed and the end capped. The micro switches cancel power when the button is pressed. If anyone can help me troubleshoot this problem I would appreciate it. TIA Dan
> >
> > Dan Williams,88WB38,Jackson,MS
> >
>