Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
air step diagnosis
06-29-2009, 05:31
Post: #5
air step diagnosis
--- In WanderlodgeForum@yahoogroups.com, "dan" wrote:
You are welcome.
I am not home with the coach and do not have my diagram. I don't recall the
light and step being on the same switch. There are either mercury or micro
switches associated with the step solenoid that can drive you nuts. I do not
remember my relays being hot.
Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
In Green Bay
>
> Thanks Leroy, I am still enjoying the clock you made for me, thanks. I have
a wiring diagram for the step in my blue box but the wire colors don't match
with the relays. Do you know if the relays should be hot? And does the step
and the light share the same switch? This step is a PITA.
> Regards,
> Dan Williams,88wb38,Jackson,MS
> ----- Original Message -----
> From: Leroy A. Eckert
> To: WanderlodgeForum@yahoogroups.com
> Sent: Sunday, June 28, 2009 8:13 AM
> Subject: [WanderlodgeForum] Re: air step diagnosis
>
>
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "pattypape" wrote:
>
> Look in the database. I think there is a wiring diagram there. I think at
least one of the other switches operates the alarm system.
> Leroy Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
> In Green Bay
> >
> >
> > Check the door switches.
> >
> > Bill 88 FC Michigan
> >
> > --- In WanderlodgeForum@yahoogroups.com, "maureyroad" wrote:
> > >
> > > My air step is not working. If I apply power directly to the solinoids
the step goes in and out properly. The dash switch light stays on all the time.
There are three door switches in the door jamb. The lower one operates the step
light and I don't know what the top two operate. The relays seem very hot to
touch and they all have power. The pressure switch has power. The wire that
supplies power to the extend solinoid has power all the time if the door is open
or closed. The pressure strip has been removed and the end capped. The micro
switches cancel power when the button is pressed. If anyone can help me
troubleshoot this problem I would appreciate it. TIA Dan
> > >
> > > Dan Williams,88WB38,Jackson,MS
> > >
> >
>
Quote this message in a reply
Post Reply 


Messages In This Thread
air step diagnosis - maureyroad - 06-27-2009, 17:39
air step diagnosis - pattypape - 06-27-2009, 23:26
air step diagnosis - Leroy A. Eckert - 06-28-2009, 01:13
air step diagnosis - dan - 06-28-2009, 07:51
air step diagnosis - Leroy A. Eckert - 06-29-2009 05:31
air step diagnosis - dan - 06-29-2009, 14:08
air step diagnosis - Chuck Wheeler - 06-29-2009, 15:09
air step diagnosis - Gregory OConnor - 06-29-2009, 16:34
air step diagnosis - dan - 06-30-2009, 08:06
air step diagnosis - Chuck Wheeler - 06-30-2009, 08:19
air step diagnosis - Ralph L. Fullenwider - 06-30-2009, 08:21
air step diagnosis - dan - 06-30-2009, 14:31
air step diagnosis - Ralph L. Fullenwider - 06-30-2009, 15:16
air step diagnosis - Gregory OConnor - 06-30-2009, 16:31
air step diagnosis - dan - 07-01-2009, 14:10



User(s) browsing this thread: 9 Guest(s)