air step diagnosis

[Ralph L. Fullenwider]

No, the power to the k4 should be removed when the prox switch or the
limit switch is made telling the system to reverse. I need to look at my
air schematic to be sure of the sequence of operation. Will get it out in
the AM. Am going to take a WAG here and bet your going to find a problem
with a butt splice in the wiring near the step.


Safe travels,


Ralph and Charolette Fullenwider

84FC35 "Ruff Diamond"

Duncan, Oklahoma


At 09:31 PM 6/30/2009 -0500, you wrote:

Hi
Ralph, I think I am getting closer to the problem. There is
power to my k4 relay all the time. Is that normal?


Dan Williams,88wb38,Jackson,MS

----- Original Message -----

From: "rlf47@swbell.net"


To: "WanderlodgeForum@yahoogroups.com"

Sent: Tuesday, June 30, 2009 3:21 PM

Subject: Re: [WanderlodgeForum] Re: air step diagnosis


Hi Dan, There are 2 switch doors and 3 switch doors.


2 Switch door; top switch is for the electrical door lock and on some models the burglar alarm as well. The second switch is the step.

3 switch doors; Top switch elect lock, middle switch alarm, bottom switch is for the step.

when the switches are behind a hinge cover, the burg alarm switch is a different configuration, not a button.


There is a change over relay in the manual switch over compartment that ties into the step. (Older FC's. There are 2 or 4 relays involved in the PT's


Safe travels,


Ralph and Charolette Fullenwider

84FC35 "Ruff Diamond"

Duncan, Oklahoma


At 03:06 PM 6/30/2009 -0500, you wrote: