Goodyear tires - BAD

[Don Bradner]

Makes sense other than that Uniseal is probably Unisteel.

There is a tendency to overinflate these tires - they carry a maximum of 130
psi, and there are those who just go to the max. That would probably be over the
proper (way over for some tire positions) level. Any idea what pressure you were
running, and what the individual axle ends weigh?

On 7/2/2009 at 3:03 PM Karen James wrote:

>As you can tell, I am not "tire literate". All of the numbers are: 315
>535 GRW-93D FO9R DOT MJ72 flaw 2708 Uniseal 80 R 22.5 G670RE, load range
>L If that makes any sense to you.
>
>
>
>
>________________________________
>From: Don Bradner
>To: WanderlodgeForum@yahoogroups.com
>Sent: Thursday, July 2, 2009 1:33:25 PM
>Subject: Re: [WanderlodgeForum] Goodyear Tires - BAD
>
>
>
>
>
>I can guess what it is, but I'd rather not - what is the missing 3 digit
>number in front of 80 (usually xxx/80) for these tires? That missing
>number is the size, and 80 is just ratio of height to width.
>
>On 7/2/2009 at 7:59 AM Karen James wrote:
>
>>The model number was 80 R 22.5 G670 RE, Load range L.